How do I fix the remote start system that is not functioning in my 2013 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes

2-3 hours

Time

medium

Difficulty

medium

Severity

4 min read

623 words

Problem Statement

Learn how to diagnose and fix the remote start system on your 2013 Volvo XC60 with step-by-step instructions and required tools.

Affected Component

remote start system

Estimated Time

2-3 hours

Symptoms

•Remote Start Fails to Activate
•Dashboard Indicators: No lights or indicators
•No Engine Crank
•Key Fob Issues

Diagnostic Steps

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•New CR2032 battery
•small screwdriver
•multimeter
•OBD-II scanner
•basic hand tools (screwdriver, socket set)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Diagnosing and Fixing the Remote Start System on a 2013 Volvo XC60

Repair Instructions

Step 1: Replace Key Fob Battery

If the fob battery was dead, simply replace it and test functionality.

Step 2: Enable Remote Start

If the remote start feature is disabled in settings, enable it according to the owner's manual.

Step 3: Repair or Replace the Key Fob

If the key fob is non-functional, consider replacing it either through a dealership or a certified locksmith.

Step 4: Clear Fault Codes

If fault codes were present, clear them using the OBD-II scanner and test the remote start again.

Step 5: Repair Remote Start Module

If the remote start module is defective:
1. Disconnect the battery to avoid electrical shorts.
2. Remove the module from its housing.
3. Repair any visible damage (e.g., solder broken connections).
4. If necessary, replace the module with a new OEM part.
5. Reconnect all wiring and secure the module back in place.

Step 6: Test the System

Reconnect the battery.
Test the remote start function with the key fob.
Ensure that the vehicle starts without issues.

Conclusion

If the remote start system is still not functioning after these steps, it may be best to consult with a certified Volvo technician for further diagnostics. There may be more advanced issues at play, such as problems with the vehicle's security system or wiring harnesses.