FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the remote start system not functioning in my 2010 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I fix the remote start system not functioning in my 2010 Volvo XC60?

How do I fix the remote start system not functioning in my 2010 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
608 words

Problem Statement

Learn how to diagnose and repair the remote start system on your 2010 Volvo XC60 with step-by-step instructions and required tools.

Affected Component
remote start system
Estimated Time
1-2 hours

Symptoms

  • •The remote start button does not respond when pressed.
  • •The vehicle does not start remotely, indicating a failure in the remote start system.
  • •There may be no sound or indication that the remote start attempt was received by the vehicle.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II Scanner
  • •Small screwdriver set
  • •Replacement key fob battery (CR2032)
  • •Vehicle owner's manual

Additional Information

Affected Component
remote start system
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing the Remote Start System on a 2010 Volvo XC60
Tools Required
  • Multimeter
  • OBD-II Scanner
  • Small screwdriver set
  • Replacement key fob battery (CR2032)
  • Vehicle owner's manual

Repair Instructions

  1. Replace Key Fob Battery:

    • Open the key fob using a small screwdriver.
    • Replace the old battery with a new CR2032 battery, ensuring the positive side faces the correct direction.
    • Reassemble the key fob and test the remote start function.

  2. Check Vehicle Battery:

    • Using a multimeter, measure the voltage of the vehicle battery.
    • If the voltage is below 12.4 volts, charge or replace the battery.
    • Ensure all battery terminals are clean and tight.

  3. Enable Remote Start Feature:

    • Start the vehicle and navigate to the settings menu on the vehicle’s infotainment system.
    • Look for the remote start settings and ensure it is enabled.
    • If the vehicle manual indicates a specific sequence for enabling the remote start, follow those instructions.

  4. Inspect and Repair Remote Start Module:

    • Locate the remote start module, typically found under the dashboard or in the engine bay (refer to the vehicle manual for exact location).
    • Disconnect the module and visually inspect it for any damaged wires or corroded connectors.
    • Reconnect all wiring securely and ensure there are no loose connections.

  5. Check for DTC Codes:

    • Connect the OBD-II scanner to the vehicle’s OBD-II port (usually under the dashboard).
    • Turn on the ignition and follow the scanner’s instructions to retrieve DTCs.
    • If codes are present, diagnose based on the specific codes retrieved. Clear the codes and test the remote start again.

  6. Test Remote Start Function:

    • With the key fob functioning and the vehicle settings verified, attempt to use the remote start feature again.
    • Press the remote start button and listen for any sounds indicating the vehicle is attempting to start.
Conclusion

If the remote start system is still not functioning after following these steps, there may be a more complex issue at play, such as a problem with the vehicle’s body control module or wiring issues. In such cases, it may be best to consult with a certified Volvo technician for further diagnosis and repair.