FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I address the windshield washer fluid not spraying in my 2011 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I address the windshield washer fluid not spraying in my 2011 Volvo XC60?

How do I address the windshield washer fluid not spraying in my 2011 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
592 words

Problem Statement

Learn how to diagnose and repair the windshield washer fluid not spraying issue in your 2011 Volvo XC60 with our step-by-step guide.

Affected Component
windshield washer system
Estimated Time
1-2 hours

Symptoms

  • •Windshield washer fluid does not spray when activated.
  • •You may hear the pump running but no fluid comes out.
  • •No fluid is visible on the windshield or on the ground underneath the vehicle.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Small needle or pin
  • •Pliers (optional)
  • •Flashlight
  • •Multimeter
  • •Fuse puller or pliers

Additional Information

Affected Component
windshield washer system
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Problem: Windshield Washer Fluid Not Spraying in 2011 Volvo XC60

Step 1: Check Washer Fluid Level
  • Tool Required: None
  • Instructions: Open the hood and locate the windshield washer fluid reservoir. Check the fluid level. If it's low or empty, refill it with the appropriate washer fluid.
Step 2: Inspect the Washer Nozzles
  • Tool Required: Small needle or pin
  • Instructions: With the windshield washer fluid level adequate, locate the washer nozzles on the hood. Use a small needle or pin to clear any debris or blockages from the nozzles.
Step 3: Listen for the Pump Operation
  • Tool Required: None
  • Instructions: Activate the windshield washer from inside the vehicle and listen for the pump. If you hear it running, this indicates that the pump is receiving power.
Step 4: Check for Clogged Hoses
  • Tool Required: Pliers (optional) and a flashlight
  • Instructions:
    1. Trace the washer fluid hoses from the reservoir to the nozzles.
    2. Look for any visible kinks, cracks, or blockages.
    3. If necessary, use pliers to disconnect the hose at various points to check for fluid flow.
Step 5: Test the Washer Pump
  • Tool Required: Multimeter
  • Instructions:
    1. Disconnect the electrical connector from the washer pump.
    2. Use a multimeter to check for voltage at the connector while activating the washer system.
    3. You should see approximately 12 volts when the system is activated. If not, check the fuse and wiring.
Step 6: Inspect the Fuse
  • Tool Required: Fuse puller or pliers
  • Instructions:
    1. Locate the fuse box (typically found under the dashboard or engine compartment).
    2. Refer to the owner's manual to find the specific fuse for the washer pump.
    3. Remove the fuse and visually inspect it for continuity. Replace it if it's blown.
Repair Instructions
Step 1: Replace Washer Fluid
  1. Open the hood and locate the washer fluid reservoir.
  2. Remove the cap and fill the reservoir with the appropriate washer fluid.
Step 2: Clean Washer Nozzles
  1. Using a pin, gently insert it into each nozzle to clear any debris.
  2. Test the spray function to ensure fluid is coming out.
Step 3: Repair or Replace Washer Hoses
  1. If you find any cracked or damaged hoses, replace them with new ones.
  2. Ensure all connections are secure and free of leaks.
Step 4: Replace the Washer Pump (if necessary)
  1. If the pump did not receive power or is malfunctioning, you may need to replace it.
  2. Disconnect the battery before starting the replacement.
  3. Remove the washer pump from the reservoir (usually held in place with clips or screws).
  4. Install the new pump in reverse order and reconnect the battery.
Step 5: Replace the Fuse (if necessary)
  1. If the fuse was blown, replace it with a new fuse of the same amperage.
  2. Re-check the system operation after the replacement.
Final Check
  • After completing the repairs, test the windshield washer system. Activate it to ensure the fluid sprays properly from the nozzles and that there are no leaks in the system.

By following these steps, you should be able to diagnose and repair the windshield washer fluid not spraying issue in your 2011 Volvo XC60.