FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the problem with my Volvo XC60’s windshield wipers not working? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How can I fix the problem with my Volvo XC60’s windshield wipers not working?

How can I fix the problem with my Volvo XC60’s windshield wipers not working?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
635 words

Problem Statement

Learn how to diagnose and fix windshield wiper issues on your Volvo XC60 (2008-2017) with this comprehensive guide.

Affected Component
windshield wipers
Estimated Time
2-4 hours

Symptoms

  • •Wipers do not move at all when activated.
  • •Wipers may move sporadically or at incorrect speeds.
  • •Wiper motor makes noise but does not move wipers.
  • •Wipers are stuck in an upright position.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdrivers (flathead and Phillips)
  • •Pliers
  • •Torx screwdriver set
  • •Vehicle repair manual
  • •Replacement parts (fuse, wiper motor, relay, etc.)

Additional Information

Affected Component
windshield wipers
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! If the windshield wipers on your Volvo XC60 (2008-2017) are not functioning, there could be multiple causes, ranging from a blown fuse to a faulty wiper motor. Below, I’ll outline a comprehensive guide to diagnose and potentially fix the issue.

Tools Required
  • Multimeter
  • Screwdrivers (flathead and Phillips)
  • Pliers
  • Torx screwdriver set
  • Vehicle repair manual (for specific torque specs and diagrams)
  • Replacement parts (fuse, wiper motor, relay, etc., as needed)
Repair Instructions

Step 1: Check the Fuse

  1. Locate the Fuse Box:

    • Open the driver’s door and locate the fuse box under the dashboard near the left side (driver’s side).

  2. Identify the Wiper Fuse:

    • Consult your vehicle’s manual to find the specific fuse for the windshield wipers.

  3. Inspect the Fuse:

    • Remove the fuse and check if it’s blown (the wire inside will be broken). Replace with a fuse of the same amperage if necessary.

Step 2: Check the Wiper Relay

  1. Locate the Relay:

    • In some models, the relay for the wipers may also be found in the fuse box or under the hood.

  2. Test the Relay:

    • Swap the relay with another identical relay in the fuse box (if available) and check if the wipers work.

Step 3: Inspect the Wiper Motor

  1. Remove the Wiper Arm:

    • Use a flathead screwdriver to gently pry off the caps covering the wiper arm nuts.
    • Use a socket wrench to remove the nuts securing the wiper arms and lift them off.

  2. Access the Motor:

    • Remove the plastic cowl panel at the base of the windshield (may require Torx screws).
    • Disconnect the wiper motor wiring harness.

  3. Test the Motor:

    • Use a multimeter to check for voltage at the motor connector when the wipers are activated. If voltage is present but the motor doesn’t work, it may need to be replaced.

  4. Replace the Wiper Motor (if necessary):

    • Remove the motor by unscrewing the mounting bolts.
    • Install the new motor in reverse order and reconnect the wiring harness.

Step 4: Reassemble

  1. Reinstall the Wiper Arms:

    • Position the wiper arms back on the motor shafts and tighten the nuts securely.

  2. Replace the Cowl Panel:

    • Reinstall the plastic cowl panel and secure it with screws.

  3. Test the Wipers:

    • Turn on the wipers to ensure they are functioning correctly.
Conclusion

If, after following these steps, the windshield wipers still do not operate, consider consulting a professional mechanic as the issue may be more complex (e.g., wiring issues, faulty wiper switch). Always ensure safety by disconnecting the battery when working on electrical components.