FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the issues with the fog lights not working in my Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How can I fix the issues with the fog lights not working in my Volvo XC60?

How can I fix the issues with the fog lights not working in my Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
582 words

Problem Statement

Learn how to troubleshoot and repair fog light issues on your Volvo XC60 (2008-2017) with step-by-step instructions and required tools.

Affected Component
fog lights
Estimated Time
2 hours

Symptoms

  • •Fog lights do not illuminate when switched on.
  • •Fog light indicator on the dashboard may not light up.
  • •Bulbs appear intact upon visual inspection.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Phillips screwdriver
  • •Flathead screwdriver
  • •Fuse puller or needle-nose pliers
  • •Wire brush or contact cleaner

Additional Information

Affected Component
fog lights
Estimated Time
2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting and Repairing Fog Lights on a Volvo XC60 (2008-2017)

Step 1: Check the Fog Light Switch
  • Tool Required: Multimeter
  • Procedure:
    1. Turn the fog light switch on.
    2. Use the multimeter to check for voltage at the fog light switch connector.
    3. If there is no voltage, the switch may be faulty or there may be an issue with the wiring.
Step 2: Inspect the Fog Light Bulbs
  • Tool Required: Phillips screwdriver, possibly a flathead screwdriver
  • Procedure:
    1. Open the hood and locate the fog light assembly.
    2. Remove the fog light cover if necessary (using a Phillips screwdriver).
    3. Remove the fog light bulb by twisting it counterclockwise and gently pulling it out.
    4. Inspect the filament for any signs of breakage or discoloration.
    5. If the bulb is damaged, replace it with a new one of the correct specification (typically H11 for XC60).
Step 3: Check the Fog Light Fuses
  • Tool Required: Fuse puller or needle-nose pliers
  • Procedure:
    1. Locate the fuse box (usually under the dashboard or in the engine compartment).
    2. Refer to the owner’s manual for the specific fuse number designated for the fog lights (commonly F19 or F20).
    3. Remove the fuse and inspect it for continuity. A blown fuse will have a broken metal strip inside.
    4. Replace with the same amperage fuse if blown.
Step 4: Test the Wiring and Connectors
  • Tool Required: Multimeter, wire brush or contact cleaner
  • Procedure:
    1. Check the wiring harness connected to the fog lights for any signs of fraying, corrosion, or disconnection.
    2. Use the multimeter to test continuity in the wires leading to the fog lights.
    3. Clean any corroded connectors with contact cleaner and ensure they are securely connected.
Step 5: Check the Relay
  • Tool Required: Multimeter
  • Procedure:
    1. Locate the fog light relay in the fuse box.
    2. Remove the relay and test it using a multimeter for continuity across the load terminals when energized.
    3. If the relay is faulty, replace it with a new one.
Repair Instructions
Replacing Fog Light Bulbs
  1. Remove the old bulb as described in Step 2.
  2. Insert the new bulb into the fog light assembly by aligning the tabs and twisting clockwise to secure it.
  3. Reattach the fog light cover, ensuring it seals properly to prevent moisture entry.
Replacing the Fog Light Fuse
  1. Remove the faulty fuse and insert a new fuse of the same amperage.
  2. Verify the connection by pressing down firmly on the fuse.
Replacing the Fog Light Relay
  1. Remove the old relay from the fuse box.
  2. Insert the new relay into the same slot, ensuring a secure fit.
Final Steps
  1. Test the Fog Lights: Turn on the fog lights to confirm they are operational.
  2. Recheck all connections: Ensure all wires and connectors are secure and free of corrosion.
  3. Close the hood and clean up any tools.
Conclusion

If all the above steps are completed and the fog lights still do not function, further investigation into the vehicle's body control module or a deeper electrical issue may be necessary. It may be advisable to consult with a professional technician for advanced diagnostics.