FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix my 2013 Volvo XC60's windshield wiper malfunction? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How can I fix my 2013 Volvo XC60's windshield wiper malfunction?

How can I fix my 2013 Volvo XC60's windshield wiper malfunction?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
646 words

Problem Statement

Troubleshoot and fix windshield wiper malfunctions on your 2013 Volvo XC60 with this detailed guide. Learn about symptoms, diagnostic steps, and required tools.

Affected Component
windshield wiper system
Estimated Time
2-4 hours

Symptoms

  • •Wipers do not operate at all.
  • •Wipers operate intermittently or erratically.
  • •Wipers function only on certain speeds (e.g., only high speed).
  • •Wipers are stuck in one position.
  • •Wiper wash function does not work.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdriver set (flat and Philips)
  • •Wrench set
  • •Replacement fuses/relays (as needed)
  • •Replacement wiper motor (if needed)
  • •Safety gloves and goggles

Additional Information

Affected Component
windshield wiper system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! If you're experiencing windshield wiper malfunctions on your 2013 Volvo XC60, it could be due to a variety of issues ranging from electrical problems to mechanical failures. Below is a detailed troubleshooting guide to help you diagnose and fix the problem.

Tools Required
  • Multimeter
  • Fuse puller or needle-nose pliers
  • Screwdriver set (flat and Philips)
  • Wrench set
  • Replacement fuses/relays (as needed)
  • Replacement wiper motor (if needed)
  • Safety gloves and goggles
Repair Instructions

Step 1: Replace the Wiper Fuse

  1. Locate the Fuse Box: Open the driver’s side door and locate the fuse box.
  2. Remove the Fuse: Use a fuse puller or needle-nose pliers to carefully remove the windshield wiper fuse.
  3. Inspect the Fuse: Check if the wire inside is broken. If so, replace it with a new fuse of the same amperage.
  4. Reassemble: Replace the fuse cover and test the wipers.

Step 2: Replace the Wiper Relay

  1. Locate the Relay: Find the wiper relay in the fuse box.
  2. Remove the Relay: Pull out the wiper relay gently.
  3. Install New Relay: Insert a new relay into the same slot.
  4. Test the Wipers: Activate the wipers to check for functionality.

Step 3: Replace the Wiper Motor (if necessary)

  1. Disconnect Battery: Always disconnect the battery before working on electrical components.
  2. Remove Wiper Arms: Use a socket wrench to remove the nuts securing the wiper arms. Carefully pull them off.
  3. Access the Wiper Motor: Remove the plastic cover from the wiper motor area (if applicable).
  4. Disconnect the Motor: Unplug the electrical connector from the motor.
  5. Remove Fasteners: Unscrew the bolts securing the wiper motor to the vehicle.
  6. Install New Motor: Position the new wiper motor and secure it with bolts. Reconnect the electrical connector.
  7. Reassemble Wiper Arms: Replace the wiper arms and secure them with nuts.
  8. Reconnect Battery: Reconnect the battery and test the wipers.
Final Checks
  • After repairs, ensure that wipers function correctly in all modes.
  • Inspect for any leaks or unusual sounds during operation.
  • Recheck the wiper blade alignment and condition.
Conclusion

If the wipers still malfunction after performing these diagnostics and repairs, it may be necessary to consult a professional technician or consider specialized equipment to further diagnose the issue.