FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I address the windshield washer pump not working in my 2013 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How can I address the windshield washer pump not working in my 2013 Volvo XC60?

How can I address the windshield washer pump not working in my 2013 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
680 words

Problem Statement

Learn how to diagnose and repair the windshield washer pump issue in your 2013 Volvo XC60 with our step-by-step guide.

Affected Component
windshield washer pump
Estimated Time
2-3 hours

Symptoms

  • •No washer fluid spraying on the windshield when the washer control is activated.
  • •Pump noise may or may not be audible when the washer switch is engaged.
  • •Fluid level in the washer reservoir may be low or empty.
  • •Washer fluid may spray on the rear window but not on the front windshield.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Basic hand tools (screwdrivers, pliers)
  • •Compressed air or a small hand pump
  • •Replacement washer pump (if necessary)
  • •Electrical cleaner (if needed)
  • •Funnel and washer fluid for filling

Additional Information

Affected Component
windshield washer pump
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Addressing Windshield Washer Pump Not Working in a 2013 Volvo XC60

Tools Required
  • Multimeter
  • Basic hand tools (screwdrivers, pliers)
  • Compressed air or a small hand pump
  • Replacement washer pump (if necessary)
  • Electrical cleaner (if needed)
  • Funnel and washer fluid for filling
Repair Instructions
Step 1: Check and Refill Washer Fluid
  1. Open the hood and locate the windshield washer fluid reservoir.
  2. Remove the cap and check the fluid level.
  3. If low, use a funnel to add washer fluid, ensuring that the reservoir is filled to the appropriate level.
Step 2: Test Pump Operation
  1. Turn on the vehicle.
  2. Activate the washer control inside the vehicle.
  3. Listen for the pump operation. If heard, check for fluid at the nozzles; if not, proceed to the next step.
Step 3: Inspect and Test Electrical Connections
  1. Disconnect the wiring harness from the washer pump.
  2. Using a multimeter, set it to measure DC voltage.
  3. While activating the washer control, probe the terminal in the connector. You should see around 12 volts. If not, trace back to the switch or fuse.
Step 4: Check for Blockages
  1. Inspect the washer fluid hose for any visible damage or disconnections.
  2. If a blockage is suspected, disconnect the hose from both the reservoir and nozzle.
  3. Use compressed air to blow through the hose to clear any obstructions.
Step 5: Replace the Washer Pump (if necessary)
  1. If the pump is not functioning and you confirmed power to it:
    • Disconnect the washer fluid reservoir from the vehicle (may require removing bolts or clips).
    • Remove the pump from the reservoir (typically involves twisting or pulling out).
    • Install the new pump by inserting it into the reservoir and securing it.
    • Reconnect the electrical connector to the new pump.
Step 6: Reassemble and Test
  1. Reattach the washer fluid reservoir to its mounting points.
  2. Reconnect any hoses that were disconnected.
  3. Fill the reservoir with washer fluid if it was emptied during the process.
  4. Test the washer system again by activating the washer control and observing the operation.
Step 7: Final Checks
  • Ensure that the washer fluid is spraying correctly on the windshield.
  • Check for any leaks around the pump or hoses.
  • Recheck the operation of the rear washer (if applicable).

By following these steps, you should be able to diagnose and repair the windshield washer pump issue in your 2013 Volvo XC60. If the problem persists after all these checks and repairs, further investigation into the vehicle's electrical system or washer control module may be required.