why does my Volkswagen Tiguan shake when I drive over bumps

Volkswagen Tiguan Second Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Learn how to diagnose and fix shaking issues in your Volkswagen Tiguan when driving over bumps. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Vehicle shakes or vibrates upon hitting bumps
•Steering wheel may feel unsteady
•Increased noise from the suspension system
•Uneven tire wear observed
•Possible clunking noises during impact

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear or damage.
2
Check tire pressure and inspect tires for uneven wear or damage.
3
Perform a wheel alignment check to ensure alignment is within specifications.
4
Examine shock absorbers or struts for leakage or wear.
5
Test drive the vehicle on various surfaces to replicate the shaking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Socket set
•Torque wrench
•Pry bar

Parts Required

•Shock absorbers or struts (if worn)
•Tires (if unevenly worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear or damage.
2
Check tire pressure and inspect tires for uneven wear or damage.
3
Perform a wheel alignment check to ensure alignment is within specifications.
4
Examine shock absorbers or struts for leakage or wear.
5
Test drive the vehicle on various surfaces to replicate the shaking.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Tools Required: Jack, jack stands, socket set, torque wrench, pry bar.

2. Inspect and Replace Suspension Components

Sub-steps:
1. Raise the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to gain access to the suspension components.
3. Check the condition of the shock absorbers or struts; look for any oil leaks or physical damage.
4. If damaged, remove the old shock/strut by unbolting it from the top and bottom mounts.
5. Install new shock absorbers or struts, ensuring they are torqued to manufacturer specifications.

3. Wheel Alignment

Sub-steps:
1. After replacing suspension components, lower the vehicle and remove jack stands.
2. Drive the vehicle to a professional shop for a wheel alignment, or perform a DIY alignment if properly equipped.
3. Adjust camber, caster, and toe angles as needed to meet manufacturer specifications.

4. Tire Inspection and Replacement

Sub-steps:
1. Inspect the tires for uneven wear patterns or damage.
2. If tires are worn excessively or damaged, replace them with new tires.
3. Ensure new tires are balanced correctly.