why does my Volkswagen Tiguan shake when I drive at high speeds

Volkswagen Tiguan Second Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

412 words

Problem Statement

Learn how to diagnose and fix shaking issues at high speeds in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always securely support the vehicle on jack stands before working underneath it.
•Disconnect the battery before working on electrical components.

Symptoms

•Vibration felt in the steering wheel
•Shaking in the driver's seat
•Uneven tire wear
•Noise from the wheels or suspension
•Steering wheel off-center while driving straight

Diagnostic Steps

1
Inspect tires for proper inflation and visible damage.
2
Perform a visual inspection of wheel rims for bends or cracks.
3
Check for uneven tire wear patterns and confirm tread depth.
4
Balance the wheels using a wheel balancer to check for imbalances.
5
Inspect suspension components (e.g., control arms, bushings, struts) for wear or damage.
6
Perform a wheel alignment check to ensure proper alignment settings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Tire pressure gauge
•Wheel balancer
•Alignment tool (or access to alignment equipment)

Parts Required

•Tires (if damaged)
•Wheel weights
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for proper inflation and visible damage.
2
Perform a visual inspection of wheel rims for bends or cracks.
3
Check for uneven tire wear patterns and confirm tread depth.
4
Balance the wheels using a wheel balancer to check for imbalances.
5
Inspect suspension components (e.g., control arms, bushings, struts) for wear or damage.
6
Perform a wheel alignment check to ensure proper alignment settings.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and set the parking brake.
Wear appropriate safety gear (gloves, glasses).

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel covers (if applicable) and loosen the lug nuts slightly.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Remove the wheels from the vehicle.
4. Inspect tires for bulges, cracks, or significant tread wear; replace any damaged tires.
5. Reinstall wheels and hand-tighten lug nuts before lowering the vehicle.

3. Wheel Balancing

Sub-steps:
1. Mount the tires on a wheel balancer.
2. Spin the wheels to identify any heavy spots.
3. Attach wheel weights where required to balance the wheels.
4. Reinstall balanced wheels on the vehicle.

4. Suspension Inspection and Repair

Sub-steps:
1. Inspect control arms, bushings, and struts for any signs of wear or damage.
2. Replace any worn components with OEM or quality aftermarket parts.
3. Ensure all bolts are torqued to manufacturer specifications.

5. Wheel Alignment

Sub-steps:
1. Take the vehicle to a certified alignment shop.
2. Adjust the alignment settings as per the manufacturer’s specifications.
3. Test drive the vehicle to ensure proper alignment.

Tools Required:

Jack and jack stands
Lug wrench
Tire pressure gauge
Wheel balancer
Alignment tool (or access to alignment equipment)

Parts Required:

Tires (if damaged)
Wheel weights
Suspension components (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always securely support the vehicle on jack stands before working underneath it.
Disconnect the battery before working on electrical components.