why does my Volkswagen Tiguan shake when I accelerate

Volkswagen Tiguan Second Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

473 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is on a flat surface before performing repairs.

Symptoms

•Shaking or vibrating felt in the steering wheel
•Vibrations in the seat or cabin
•Noticeable increase in shaking at higher speeds
•Potential loss of power during acceleration
•Unusual noise accompanying the vibration

Diagnostic Steps

1
Inspect the tires for uneven wear or damage.
2
Check wheel balancing and alignment.
3
Examine the suspension components for wear or damage.
4
Inspect engine and transmission mounts for deterioration.
5
Scan for any error codes using an OBD-II scanner.
6
Test drive the vehicle to replicate and assess the severity of the shaking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Inspection jack
•Wheel balancer
•Alignment machine
•Socket set
•Wrench set
•Torque wrench

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•Engine and transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for uneven wear or damage.
2
Check wheel balancing and alignment.
3
Examine the suspension components for wear or damage.
4
Inspect engine and transmission mounts for deterioration.
5
Scan for any error codes using an OBD-II scanner.
6
Test drive the vehicle to replicate and assess the severity of the shaking.

Solution

1. Tire Inspection

Sub-steps:
- Visually inspect each tire for bulges, cracks, or uneven wear.
- Measure tire pressure and ensure it meets manufacturer specifications.
Tools Required: Tire pressure gauge, inspection jack.

2. Wheel Balancing and Alignment

Sub-steps:
- If tires are worn or improperly balanced, remove the wheels.
- Use a wheel balancer to check and correct the balance.
- Check alignment settings and adjust as necessary using an alignment machine.
Tools Required: Wheel balancer, alignment machine.

3. Inspect Suspension Components

Sub-steps:
- Lift the vehicle using a jack and secure it with jack stands.
- Manually check for play in control arms, ball joints, and tie rods.
- Replace any worn or damaged components.
Tools Required: Socket set, wrench set, jack and jack stands.

4. Check Engine and Transmission Mounts

Sub-steps:
- Inspect mounts for cracks, tears, or excessive play.
- If damaged, remove the defective mount and replace it with a new one.
- Tighten new mount bolts to manufacturer torque specifications.
Tools Required: Torque wrench, socket set.

5. Test Drive

Sub-steps:
- After repairs, conduct a test drive to evaluate if the shaking persists.
- Observe for any unusual noises or changes in vibration.
Tools Required: None.