my Volkswagen Tiguan makes a knocking noise when I accelerate what's causing it

Volkswagen Tiguan Second Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

528 words

Problem Statement

Learn how to diagnose and fix knocking noise when accelerating in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before working on the engine or exhaust components.

Symptoms

•Knocking noise when accelerating
•Vibration felt through the steering wheel
•Decreased acceleration performance
•Unusual noises during turns
•Possible check engine light illuminated

Diagnostic Steps

1
Inspect the engine and transmission mounts for wear or damage.
2
Check the drive axles and CV joints for signs of damage or wear.
3
Examine the suspension components, including struts and bushings, for any play or damage.
4
Use an OBD-II scanner to check for any stored diagnostic trouble codes (DTCs).
5
Test drive the vehicle to identify the conditions under which the noise occurs.
6
Visually inspect the exhaust system for loose components or contact with the chassis.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Wrench set
•Torque wrench
•OBD-II scanner

Parts Required

•Engine mounts (if worn)
•Transmission mounts (if worn)
•Drive axles or CV joints (if damaged)
•Suspension struts or bushings (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the engine and transmission mounts for wear or damage.
2
Check the drive axles and CV joints for signs of damage or wear.
3
Examine the suspension components, including struts and bushings, for any play or damage.
4
Use an OBD-II scanner to check for any stored diagnostic trouble codes (DTCs).
5
Test drive the vehicle to identify the conditions under which the noise occurs.
6
Visually inspect the exhaust system for loose components or contact with the chassis.

Solution

1. Preparation

Tools Required: Jack and jack stands, socket set, wrench set, torque wrench, OBD-II scanner.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Disconnect the battery to avoid any electrical issues during repairs.

2. Inspect and Replace Engine/Transmission Mounts

Sub-steps:
1. Raise the vehicle with a jack and securely place it on jack stands.
2. Locate the engine and transmission mounts.
3. Visually inspect mounts for cracks or excessive wear; if damaged, remove the bolts securing the mounts.
4. Replace with new mounts, ensuring proper alignment.
5. Torque the mount bolts to the manufacturer's specifications (refer to the service manual for exact torque values).

3. Check and Replace Drive Axles/CV Joints

Sub-steps:
1. Inspect the drive axles for any visible damage or torn CV boot.
2. If damaged, remove the axle nut and disconnect the axle from the wheel hub.
3. Replace the axle or CV joint as necessary.
4. Reassemble the axle, ensuring the nut is torqued to specification.

4. Examine and Repair Suspension Components

Sub-steps:
1. Inspect struts, shocks, and bushings for damage or excessive play.
2. Replace any worn or damaged components.
3. Reassemble and torque all bolts to the manufacturer’s specifications.

5. Reconnect Battery

After completing repairs, reconnect the battery and clear any error codes using the OBD-II scanner.