my Volkswagen Tiguan is making a knocking noise when I accelerate, what's wrong?

Volkswagen Tiguan Second Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

481 words

Problem Statement

Learn how to diagnose and fix knocking noise during acceleration in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before working on it.

Symptoms

•Knocking noise when accelerating
•Possible vibration felt through the steering wheel or floor
•Decreased engine performance or power
•Unusual noises during deceleration or shifting
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect the engine mounts for signs of wear or damage.
2
Check the transmission fluid level and condition.
3
Scan for any error codes using an OBD-II scanner.
4
Inspect suspension components (e.g., control arms, bushings) for any signs of wear or damage.
5
Listen for the noise while the vehicle is idling to determine if it is engine-related.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Funnel
•Jack
•Jack stands

Parts Required

•Engine mounts (if damaged)
•Transmission fluid (if low)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the engine mounts for signs of wear or damage.
2
Check the transmission fluid level and condition.
3
Scan for any error codes using an OBD-II scanner.
4
Inspect suspension components (e.g., control arms, bushings) for any signs of wear or damage.
5
Listen for the noise while the vehicle is idling to determine if it is engine-related.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety.

2. Inspect Engine Mounts

Locate the engine mounts (usually near the engine block).
Visually inspect for cracks, tears, or excessive wear.
If damaged, replace with OEM parts.
- Tools required: Socket set, torque wrench.

3. Check Transmission Fluid

Locate the transmission dipstick and remove it.
Wipe it clean, reinsert, and check the fluid level.
If fluid is low, add the correct type of transmission fluid (refer to owner's manual).
- Tools required: Funnel, transmission fluid.
- Safety warnings: Ensure the vehicle is in park or neutral and has cooled down before checking.

4. Inspect Suspension Components

Lift the vehicle securely using jack stands.
Inspect control arms, bushings, and joints for wear or damage.
Replace any worn components as necessary.
- Tools required: Jack, jack stands, socket set.

5. Address Engine Issues (if applicable)

If error codes indicate misfires or other engine issues, follow up with the necessary repairs such as replacing spark plugs or ignition coils.
- Tools required: Socket set, spark plug socket.
- Safety warnings: Allow the engine to cool before working on it.