how to reset my Volkswagen Tiguan's service light after an oil change

Volkswagen Tiguan Second Generation (2018-present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

356 words

Problem Statement

Learn how to reset the service light on your Volkswagen Tiguan after an oil change. Step-by-step guide to clear the maintenance reminder.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' or 'Neutral' before performing the reset.

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition without starting the engine.
3
Press and hold the gas pedal fully down.
4
Turn the ignition to the 'On' position while still holding the gas pedal down (do not start the engine).
5
Observe the dashboard for the service light to flash and eventually turn off.
6
Release the gas pedal after the light has reset.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition without starting the engine.
3
Press and hold the gas pedal fully down.
4
Turn the ignition to the 'On' position while still holding the gas pedal down (do not start the engine).
5
Observe the dashboard for the service light to flash and eventually turn off.
6
Release the gas pedal after the light has reset.

Solution

1. Preparation

2. Resetting the Service Light