FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Volkswagen Tiguan Second Generation (2018-present) make a whining noise when turning - Volkswagen Tiguan
Home/Cars/Volkswagen/Tiguan/2nd Gen (2018-Present)/why does my Volkswagen Tiguan Second Generation (2018-present) make a whining noise when turning

why does my Volkswagen Tiguan Second Generation (2018-present) make a whining noise when turning

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
541 words

Problem Statement

Learn how to diagnose and fix whining noise when turning in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on the power steering system to avoid burns.

Symptoms

  • •Whining noise when turning the steering wheel
  • •Difficulty in steering or increased steering effort
  • •Fluid leaks under the vehicle
  • •Steering wheel vibration during turns
  • •Check engine or power steering warning light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fluid pump
  • •Socket set
  • •Wrench set
  • •Power steering pump removal tool
  • •Belt tensioner tool

Parts Required

  • •Power steering fluid
  • •Power steering pump (if needed)
  • •Drive belt (if needed)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to ensure safety.
2. Inspect and Replace Power Steering Fluid
  • Tools Required: Fluid pump, container for old fluid.
  • Check the power steering fluid reservoir; if low, add the recommended power steering fluid as per the owner's manual.
  • If the fluid appears dark or contaminated, drain the old fluid using a fluid pump, and refill with new fluid.
3. Check and Replace Power Steering Pump (if necessary)
  • Tools Required: Socket set, wrench set, power steering pump removal tool.
  • Remove any components obstructing access to the power steering pump.
  • Disconnect the power steering hoses from the pump. Be prepared for fluid spillage.
  • Unbolt and remove the power steering pump from its bracket.
  • Install the new power steering pump by reversing the removal steps and torque bolts to the manufacturer's specifications.
4. Inspect and Replace Drive Belt (if necessary)
  • Tools Required: Socket set, belt tensioner tool.
  • Check the condition of the drive belt for cracks or wear.
  • Use a belt tensioner tool to relieve tension on the drive belt.
  • Remove the old belt and install the new belt, ensuring proper routing according to the diagram located in the engine bay.
5. Reassemble and Test
  • Reconnect any components that were removed for access.
  • Reconnect the negative battery terminal.
  • Start the engine and turn the steering wheel to ensure the whining noise is resolved.