my Volkswagen Tiguan Second Generation (2018-present) shakes when I brake, is this normal?

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

459 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and fix shaking during braking in your Volkswagen Tiguan. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electronic components.
•Allow brake components to cool before handling to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt through the brake pedal
•Uneven wear on brake pads
•Pulsation of the brake pedal
•Possible squeaking or grinding noises when braking

Diagnostic Steps

1
Inspect front and rear brake components for wear or damage.
2
Check brake rotor thickness using a micrometer to ensure they are within specifications.
3
Perform a visual inspection of the brake pads for uneven wear.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Micrometer
•Brake cleaner

Parts Required

•Brake pads (if worn)
•Brake rotors (if warped or below thickness)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect front and rear brake components for wear or damage.
2
Check brake rotor thickness using a micrometer to ensure they are within specifications.
3
Perform a visual inspection of the brake pads for uneven wear.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Wear safety glasses and gloves.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels using a socket set.

3. Inspect and Replace Brake Components

Check Brake Pads:
- Remove the caliper bolts using a socket wrench.
- Lift the caliper off the rotor and support it without stressing the brake line.
- Inspect the brake pads for uneven wear and replace if necessary.
Check Brake Rotors:
- Remove the rotor if warped or below minimum thickness.
- Use a micrometer to measure the rotor thickness.
- If necessary, replace with new rotors ensuring proper torque specifications (typically 80-100 ft-lbs for rotor bolts).

4. Reassemble Components

Reattach the caliper and ensure all bolts are tightened to manufacturer specifications.
Reinstall the wheel and lug nuts, tightening them in a star pattern to the specified torque (typically 90-100 ft-lbs).

5. Lower the Vehicle and Test

Carefully remove jack stands and lower the vehicle.
Perform a test drive to ensure the shaking has been resolved.