my Volkswagen Tiguan Second Generation (2018-present) makes a clunking noise when turning, what's th...

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

582 words

Problem Statement

Learn how to diagnose and fix clunking noise when turning in Volkswagen Tiguan. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Make sure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Clunking noise when turning the steering wheel
•Noise varies with speed of the turn
•Possible vibration in the steering wheel
•Increased play in the steering
•Uneven tire wear on the front tires

Diagnostic Steps

1
Inspect wheel wells for any visible signs of damage or foreign objects that may be causing the noise.
2
Check the condition of the CV joints and boots for any tears or leaks.
3
Lift the vehicle and perform a visual inspection of the suspension components, including control arms and bushings.
4
Test the steering system by turning the wheel while stationary to listen for noise.
5
Check the tightness of the wheel lug nuts to ensure they are properly secured.
6
Inspect the strut mounts for any signs of wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Screwdrivers
•Pliers

Parts Required

•New CV axle (if damaged)
•Control arm (if damaged)
•Strut mount (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect wheel wells for any visible signs of damage or foreign objects that may be causing the noise.
2
Check the condition of the CV joints and boots for any tears or leaks.
3
Lift the vehicle and perform a visual inspection of the suspension components, including control arms and bushings.
4
Test the steering system by turning the wheel while stationary to listen for noise.
5
Check the tightness of the wheel lug nuts to ensure they are properly secured.
6
Inspect the strut mounts for any signs of wear or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect and Replace CV Joint

Lift the Vehicle: Use a jack to raise the front of the vehicle and secure it with jack stands.
Remove Wheel: Use a socket set to remove the lug nuts and take off the affected wheel.
Inspect CV Joint: Check the CV joint for any signs of wear or damage. If the boot is torn or the joint is worn, replace it.
Remove CV Axle:
- Remove the retaining bolts using a socket set.
- Carefully pull the CV axle out of the hub assembly.
Install New CV Axle:
- Insert the new CV axle into the hub assembly.
- Tighten the retaining bolts to the manufacturer's specified torque.

3. Inspect and Replace Suspension Components

Check Control Arms and Bushings:
- Inspect for cracks or excessive wear.
- If damaged, remove the bolts securing the control arm using a socket set.
Replace Control Arm:
- Position the new control arm and secure it with the bolts, tightening them to the recommended torque specifications.
Check Strut Mounts:
- If strut mounts are worn, remove the strut assembly from the vehicle.
- Replace the strut mount as needed and reassemble.

4. Reassembly

Reinstall Wheel: Place the wheel back on the hub and hand-tighten the lug nuts.
Lower the Vehicle: Carefully lower the vehicle back to the ground.
Torque Lug Nuts: Use a torque wrench to tighten the lug nuts to the manufacturer's specifications.