how to reset the oil light in my Volkswagen Tiguan Second Generation (2018-present)

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

420 words

Problem Statement

Learn how to reset the oil light in your Volkswagen Tiguan (2018-present) with this step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Engine

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely before performing the reset procedure.

Symptoms

•Oil light remains illuminated on the dashboard
•Maintenance reminder message displayed
•Engine oil change has been performed

Diagnostic Steps

1
Turn the ignition off and ensure the vehicle is in the OFF position.
2
Press and hold the trip reset button on the dashboard.
3
Turn the ignition to the ON position without starting the engine while continuing to hold the trip reset button.
4
Release the trip reset button once you see the 'oil change' or 'service' message on the display.
5
Confirm that the oil light has been reset by turning the ignition off and then back on.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle owner's manual

Parts Required

•No parts required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition off and ensure the vehicle is in the OFF position.
2
Press and hold the trip reset button on the dashboard.
3
Turn the ignition to the ON position without starting the engine while continuing to hold the trip reset button.
4
Release the trip reset button once you see the 'oil change' or 'service' message on the display.
5
Confirm that the oil light has been reset by turning the ignition off and then back on.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off all accessories (radio, lights, etc.) to prevent battery drain.

2. Reset the Oil Light

Access the Ignition:
- Insert the key into the ignition or ensure the key fob is in the vehicle.
Hold Trip Reset Button:
- Locate the trip reset button on the dashboard (usually near the speedometer).
- Press and hold the trip reset button.
Turn on Ignition:
- While holding the trip reset button, turn the ignition key to the ON position (or press the start button without pressing the brake pedal in vehicles with push start).
- Do not start the engine.
Release Button:
- After a few seconds, release the trip reset button. The display should show a message indicating the oil change has been reset.
Turn Off Ignition:
- Turn the ignition back to the OFF position.
Verify Reset:
- Start the engine and check the dashboard to ensure the oil light is no longer illuminated.