how to reset the oil change light on my Volkswagen Tiguan Second Generation (2018-present)

Volkswagen Tiguan 2nd Gen (2018-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

324 words

Problem Statement

Learn how to reset the oil change light on your Volkswagen Tiguan (2018-present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral with the parking brake engaged before performing this procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•No other engine warning lights are present

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the 'Gas' pedal three times within a span of 10 seconds.
3
Turn the ignition off and then back on.
4
Verify if the oil change light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools:
- Ignition key or key fob
Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Access Ignition

Insert the ignition key into the ignition switch or ensure the key fob is inside the vehicle for push-start systems.

3. Turn On Ignition

Turn the ignition to the "On" position (do not start the engine).

4. Reset Oil Change Light

Quickly press the gas pedal three times within 10 seconds.
Watch for any changes on the dashboard display.

5. Turn Off Ignition

After pressing the gas pedal, turn the ignition off.

6. Verify Reset

Turn the ignition back to the "On" position and check if the oil change light is no longer illuminated.