how to reset the oil light on Volkswagen Tiguan First Generation (2007-2018)

Volkswagen Tiguan First Generation (2007-2018)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

381 words

Problem Statement

Learn how to reset the oil light on a 2007-2018 Volkswagen Tiguan. Step-by-step guide to ensure your oil change reminder is cleared.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged when performing this procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance message displayed on the instrument cluster
•Engine oil warning light remains on even after oil change

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Put the key in the ignition and turn it to the 'On' position without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn off the ignition and then turn it back on to check if the oil light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key/ignition key

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Put the key in the ignition and turn it to the 'On' position without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn off the ignition and then turn it back on to check if the oil light has reset.

Solution

1. Preparation

Gather all necessary tools and materials before starting.
Ensure the vehicle is parked safely and is in the "On" position without starting the engine.

2. Accessing the Oil Light Reset Procedure

Insert the key into the ignition and turn it to the "On" position, making sure the engine is not running.
Wait for the instrument panel to power up fully.

3. Resetting the Oil Light

Press the accelerator pedal to the floor three times in quick succession.
After the third time, turn the ignition off completely.

4. Verifying the Reset

Turn the ignition back to the "On" position without starting the engine.
Check the instrument cluster to confirm that the oil light is no longer illuminated.