how to reset the maintenance light on my Volkswagen Passat B8 (2015-2022)

Volkswagen Passat B9 (2024-Present)

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

337 words

Problem Statement

Learn how to reset the maintenance light on your Volkswagen Passat B8 (2015-2022) after an oil change. Step-by-step guide for quick and easy reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

•Ensure that the vehicle is in 'Park' or 'Neutral' and on a flat surface when performing the reset to prevent unintended movement.

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition, but do not start the engine.
3
Press the accelerator pedal three times within 10 seconds without starting the engine.
4
Turn the ignition off for a few seconds.
5
Turn the ignition back on, but do not start the engine, and check if the maintenance light has turned off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition, but do not start the engine.
3
Press the accelerator pedal three times within 10 seconds without starting the engine.
4
Turn the ignition off for a few seconds.
5
Turn the ignition back on, but do not start the engine, and check if the maintenance light has turned off.

Solution

1. Preparation

2. Resetting the Maintenance Light

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Press the accelerator pedal three times quickly.
Turn the ignition off for a few seconds.
Turn the ignition back to the "On" position again without starting the engine.
Check the dashboard to see if the maintenance light is off; if not, repeat the steps.