how to reset the maintenance light on Volkswagen Passat B8 (2015-2022)

Volkswagen Passat B8 (2015-2022)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

390 words

Problem Statement

Learn how to reset the maintenance light on your 2015-2022 Volkswagen Passat B8. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode before performing the reset.

1
Sit in the driver's seat and close all doors.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal.
3
Use the vehicle's multi-function steering wheel controls to navigate to the 'Settings' menu on the dashboard display.
4
Select 'Vehicle' and then 'Maintenance' from the settings menu.
5
Locate the option to reset the maintenance light and select it.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal.
3
Use the vehicle's multi-function steering wheel controls to navigate to the 'Settings' menu on the dashboard display.
4
Select 'Vehicle' and then 'Maintenance' from the settings menu.
5
Locate the option to reset the maintenance light and select it.

Solution

1. Preparation

2. Resetting the Maintenance Light

Turn on Ignition: Insert the key and turn it to the "On" position, or press the start button without pressing the brake pedal.
Access Settings: Use the multi-function steering wheel buttons to navigate through the dashboard display to the "Settings" menu.
Select Vehicle Option: Scroll down to "Vehicle" and press the "OK" button to select it.
Go to Maintenance: Navigate to "Maintenance" and select it.
Reset Maintenance Light: Look for the option labeled "Reset" or "Reset Oil Change" and confirm the selection by pressing the "OK" button.
Confirmation: A confirmation message will appear; select "Yes" to confirm the reset.