FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix a Volkswagen Passat B8 (2015-2022) that shakes while braking - Volkswagen Passat
Home/Cars/Volkswagen/Passat/B8 (2015-2022)/how to fix a Volkswagen Passat B8 (2015-2022) that shakes while braking

how to fix a Volkswagen Passat B8 (2015-2022) that shakes while braking

Volkswagen Passat B8 (2015-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
511 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking while braking in Volkswagen Passat B8 (2015-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool down before handling brake components to avoid burns.

Symptoms

  • •Vehicle shakes or vibrates during braking
  • •Steering wheel trembles when brakes are applied
  • •Uneven brake pad wear
  • •Increased stopping distance
  • •Possible noise from brakes (squeaking or grinding)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Hydraulic jack
  • •Jack stands
  • •Socket set
  • •Torque wrench
  • •Wire/bungee cord
  • •Dial indicator or runout gauge

Parts Required

  • •Brake pads
  • •Brake rotors

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is on a flat surface and securely parked.
  • Gather necessary tools and parts before starting.
  • Wear safety gloves and goggles.
2. Inspect and Replace Brake Pads and Rotors

  1. Raise the Vehicle

    • Use a hydraulic jack to lift the vehicle and secure it with jack stands.

  2. Remove Wheel

    • Use a socket set to remove the lug nuts and take off the wheel.

  3. Remove Brake Caliper

    • Unbolt the brake caliper using a socket wrench.
    • Carefully hang the caliper using a wire or bungee cord to avoid straining the brake line.

  4. Remove Brake Rotor

    • Remove any retaining screws if present.
    • Slide the rotor off the hub.

  5. Inspect Components

    • Check the condition of the brake pads and rotors. Replace if they show signs of wear (less than 3mm thickness) or warping.

  6. Install New Components

    • Place the new rotor onto the hub.
    • Reinstall the brake caliper over the new pads and rotor, ensuring proper alignment.
    • Torque caliper bolts to manufacturer specifications (typically 25-30 Nm).

  7. Reinstall Wheel

    • Place the wheel back on and hand-tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to manufacturer specifications (usually 120 Nm).
3. Wheel Alignment and Balancing
  1. Take to a Professional
    • After replacing brake components, take the vehicle to a professional alignment shop to check and adjust wheel alignment and balance as necessary.