why does my Volkswagen Golf MK7 (2015-2019) steering wheel shake when braking

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Ensure the vehicle is on a flat surface and engage the parking brake.
• Place wheel chocks behind the rear wheels.

2. Remove Wheel

• Use a lug wrench to loosen the lug nuts while the vehicle is still on the ground.
• Lift the vehicle using a jack and secure it with jack stands.
• Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

• Inspect Brake Rotors:
  • Use a dial indicator to measure rotor runout. If warping exceeds manufacturer specifications, replace the rotors.
• Replace Brake Pads:
  • Remove the caliper bolts using a socket set.
  • Slide the caliper off and remove the old brake pads.
  • Install new brake pads, ensuring they are oriented correctly.
  • Reattach the caliper and torque the bolts to the manufacturer specifications (typically around 25-30 Nm).

4. Check Suspension Components

• Inspect control arms, tie rods, and wheel bearings for wear or play.
• Replace any damaged components, ensuring all nuts and bolts are torqued to specifications.

5. Wheel Alignment and Balancing

• Have the wheels aligned and balanced by a professional to ensure proper handling and to prevent future vibrations.

Tools Required:

• Lug wrench
• Jack and jack stands
• Dial indicator
• Socket set
• Torque wrench

Parts Required:

• New brake rotors (if warped)
• New brake pads
• Suspension components (if damaged)

Estimated Repair Time: 2-4 hours

Safety Warnings:

• Always disconnect the battery before working on any electrical components.
• Allow the brakes to cool before working on them to avoid burns.