FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why are my Volkswagen Golf MK7 (2015-2019) fog lights not working - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK8.5 (2024-Present)/why are my Volkswagen Golf MK7 (2015-2019) fog lights not working

why are my Volkswagen Golf MK7 (2015-2019) fog lights not working

Volkswagen Golf MK8.5 (2024-Present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

Problem Statement

Learn how to diagnose and fix fog lights not working on Volkswagen Golf MK7 (2015-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shorts or shocks.
  • •Allow the engine and headlights to cool down before handling components.

Symptoms

  • •Fog lights do not illuminate when activated
  • •Fog light indicator on the dashboard does not light up
  • •Possible blown fuses related to the fog lights
  • •No unusual noises or signs of electrical shorts
  • •Headlights functioning normally

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Screwdriver set

Parts Required

  • •Replacement fog light bulbs
  • •Replacement fog light relay (if necessary)
  • •Replacement fuse (if necessary)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: multimeter, socket set, screwdriver set, replacement bulbs (if needed), replacement fuse (if needed).
  • Ensure the vehicle is parked on a flat surface with the ignition turned off.
2. Check the Fog Light Switch
  • Locate the fog light switch on the dashboard.
  • Turn the switch to the 'On' position and verify its operation. If the switch feels damaged or does not click, it may need replacement.
3. Inspect Fog Light Bulbs
  • Remove the fog light housing by unscrewing the retaining screws.
  • Twist the bulb socket counterclockwise to remove the bulb.
  • Inspect the bulb for any signs of filament breakage or discoloration. Replace if necessary.
4. Test Voltage at Connector
  • Reconnect the fog light housing but leave the bulbs out.
  • Turn the fog light switch on.
  • Use a multimeter to measure voltage at the fog light connector. A reading of 12V indicates the circuit is functioning; a lower reading suggests wiring issues.
5. Check the Fog Light Relay
  • Locate the fog light relay in the fuse box (refer to the owner's manual for specific location).
  • Remove the relay and use a multimeter to test it for continuity.
  • If the relay is faulty, replace it with a new one.
6. Inspect the Fuse
  • Check the fog light fuse in the fuse box for continuity using a multimeter.
  • If the fuse is blown, replace it with one of the same amperage (check the owner’s manual for the correct rating).