FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK7 (2015-2019) is not getting any fuel, what could be the problem? - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK8.5 (2024-Present)/my Volkswagen Golf MK7 (2015-2019) is not getting any fuel, what could be the problem?

my Volkswagen Golf MK7 (2015-2019) is not getting any fuel, what could be the problem?

Volkswagen Golf MK8.5 (2024-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
535 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Diagnose and fix fuel delivery issues in Volkswagen Golf MK7 (2015-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on the fuel system to prevent sparks.
  • •Allow the engine to cool down before working on any components near the fuel system.

Symptoms

  • •Engine cranks but fails to start
  • •No fuel pump activation sound when the ignition is turned on
  • •Fuel gauge reading empty despite a full tank
  • •Engine stalling after a brief run if it starts
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Multimeter
  • •Socket set
  • •Torque wrench

Parts Required

  • •Fuel pump (if faulty)
  • •Fuel pump relay (if necessary)
  • •Fuel pump fuse (if blown)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to avoid any electrical shorts.
  • Ensure the vehicle is safely elevated if necessary for access.
2. Fuel Pump Fuse and Relay Inspection
  • Sub-step 1: Locate the fuse box, typically found under the dashboard or in the engine compartment.
  • Sub-step 2: Remove the fuel pump fuse and inspect it for continuity; replace if blown.
  • Sub-step 3: Locate the fuel pump relay, remove it, and test it by applying power to the terminals; replace if faulty.
3. Fuel Pressure Test
  • Sub-step 1: Connect the fuel pressure gauge to the fuel rail service port.
  • Sub-step 2: Turn the ignition key to the "ON" position (do not start) and observe the pressure reading; it should be within the manufacturer's specifications (typically 50-60 psi for MK7).
  • Sub-step 3: If pressure is low or nonexistent, proceed to the next step.
4. Fuel Pump Replacement (if necessary)
  • Sub-step 1: Remove the rear seat or access panel to gain access to the fuel pump assembly.
  • Sub-step 2: Disconnect the fuel lines from the pump, being cautious of fuel spillage.
  • Sub-step 3: Disconnect the electrical connector from the fuel pump.
  • Sub-step 4: Remove the fuel pump assembly from the tank.
  • Sub-step 5: Install the new fuel pump assembly by reversing the removal steps, ensuring all seals are properly seated and connections are tight.