how to reset the oil light on a Volkswagen Golf MK7 (2015-2019)

Volkswagen Golf MK8.5 (2024-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

326 words

Problem Statement

Learn how to reset the oil light on your Volkswagen Golf MK7 (2015-2019) with this simple step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Possible service reminder message displayed
•No engine performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Observe the oil light and any service messages on the dashboard.
5
Turn the ignition off and then start the engine to verify the light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Observe the oil light and any service messages on the dashboard.
5
Turn the ignition off and then start the engine to verify the light has been reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the ignition key or key fob ready.

2. Turn on the Ignition

Insert the key into the ignition.
Turn the key to the "On" position (do not start the engine).

3. Reset the Oil Light

Quickly press the gas pedal three times within 10 seconds.
Watch for the oil light to extinguish or the service message to disappear.

4. Verify the Reset

Turn the ignition off completely.
Start the engine to ensure the oil light does not reappear.