FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the windshield wipers not working in my Volkswagen Golf MK7.5 (2020-Present)? - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK8.5 (2024-Present)/how to fix the windshield wipers not working in my Volkswagen Golf MK7.5 (2020-Present)?

how to fix the windshield wipers not working in my Volkswagen Golf MK7.5 (2020-Present)?

Volkswagen Golf MK8.5 (2024-Present)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
508 words

Problem Statement

Learn how to diagnose and fix windshield wipers not working in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shorts or shocks.

Symptoms

  • •Windshield wipers do not activate when switch is turned on
  • •No sound or movement from wipers
  • •Washer fluid does not spray when activated
  • •Dashboard warning light for wipers illuminated
  • •Possible intermittent functioning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdriver set
  • •Fuse puller or needle-nose pliers
  • •Trim removal tool

Parts Required

  • •Windshield wiper motor (if faulty)
  • •Windshield wiper switch (if faulty)
  • •Fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Check and Replace Fuse
  • Tools Required: Fuse puller or needle-nose pliers
  • Locate the fuse box (usually under the dashboard or near the driver's side).
  • Identify the windshield wiper fuse using the diagram on the fuse box cover.
  • Remove the fuse and inspect it. If blown, replace it with a fuse of the same amperage (typically 10A or 15A).
  • Reconnect the fuse box cover.
3. Inspect and Test Wiper Motor
  • Tools Required: Screwdriver set, multimeter
  • Remove any covers or panels blocking access to the wiper motor.
  • Disconnect the wiper motor electrical connector.
  • Test the motor for voltage using a multimeter while someone activates the wiper switch.
  • If voltage is present and the motor does not operate, replace the wiper motor.
4. Replace Wiper Switch (if necessary)
  • Tools Required: Screwdriver set, trim removal tool
  • Remove the steering column cover by unscrewing the screws.
  • Disconnect the electrical connector from the wiper switch.
  • Replace the switch with a new one and reassemble the steering column.
5. Reconnect Battery and Test
  • Reconnect the negative battery terminal.
  • Test the windshield wipers to ensure proper functioning.