how can I reset the service light on my Volkswagen Golf MK7 (2015-2019)

Volkswagen Golf MK8.5 (2024-Present)

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the service light on your 2015-2019 Volkswagen Golf MK7. Step-by-step guide with diagnostic procedures and instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral and the parking brake is engaged before attempting the reset.

1
Ensure the vehicle is parked on a level surface and in the 'Off' position.
2
Insert the key into the ignition without turning it (or press the start button without pressing the brake pedal for keyless models).
3
Locate the '0.0' button on the instrument cluster.
4
Press and hold the '0.0' button while turning the ignition to the 'On' position (but do not start the engine).
5
Release the '0.0' button after a few seconds and check if the service light is reset.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and in the 'Off' position.
2
Insert the key into the ignition without turning it (or press the start button without pressing the brake pedal for keyless models).
3
Locate the '0.0' button on the instrument cluster.
4
Press and hold the '0.0' button while turning the ignition to the 'On' position (but do not start the engine).
5
Release the '0.0' button after a few seconds and check if the service light is reset.

Solution

1. Preparation

2. Resetting the Service Light

Turn on the Ignition:
- Insert the vehicle key into the ignition (or use the start button).
- Turn the ignition to the "On" position without starting the engine.
Press the "0.0" Button:
- Locate the "0.0" button on the dashboard (usually found near the speedometer).
- Press and hold the "0.0" button.
Wait for the Reset:
- While holding the "0.0" button, turn the ignition to the "On" position (do not start the engine).
- Keep holding the button until the display shows a confirmation that the service light has been reset.
Release the Button:
- Once the confirmation appears, release the "0.0" button.
- Turn off the ignition and then start the engine to ensure the service light is no longer illuminated.