how can I fix the shaking in my Volkswagen Golf MK7 (2015-2019) when accelerating

Volkswagen Golf MK8.5 (2024-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

527 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Volkswagen Golf MK7 (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before inspecting under the hood or chassis.

Symptoms

•Vibration or shaking felt through the steering wheel
•Increased noise from the engine compartment or undercarriage
•Shaking intensifies at certain speeds or RPMs
•Uneven tire wear observed
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balancing by performing a visual inspection and using a wheel balancer.
3
Examine suspension components, including struts, shocks, and bushings for wear or damage.
4
Inspect engine and transmission mounts for signs of deterioration or failure.
5
Use an OBD-II scanner to check for any stored error codes related to drivetrain issues.
6
Test drive the vehicle to replicate the shaking and determine at what speeds it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Wheel balancer
•Socket set
•Torque wrench
•Pry bar

Parts Required

•New tires (if necessary)
•Suspension components (if worn)
•Engine and transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balancing by performing a visual inspection and using a wheel balancer.
3
Examine suspension components, including struts, shocks, and bushings for wear or damage.
4
Inspect engine and transmission mounts for signs of deterioration or failure.
5
Use an OBD-II scanner to check for any stored error codes related to drivetrain issues.
6
Test drive the vehicle to replicate the shaking and determine at what speeds it occurs.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent any electrical issues.

2. Tire Inspection and Balancing

Tools Required: Tire pressure gauge, jack, jack stands, wheel balancer.
Check tire pressure and adjust to manufacturer specifications.
Remove each wheel and inspect for uneven wear.
Balance the wheels using a wheel balancer; add weights as necessary.

3. Suspension Component Inspection

Tools Required: Socket set, torque wrench, pry bar.
Visually inspect all suspension components for signs of wear or damage.
Use a pry bar to check for play in bushings and ball joints.
Replace any worn or damaged components.

4. Engine and Transmission Mount Inspection

Tools Required: Socket set, torque wrench.
Inspect engine and transmission mounts for cracks or excessive wear.
If mounts are damaged, remove the old mounts and replace them with new ones, ensuring proper torque specifications are followed.

5. Final Assembly and Testing

Reinstall wheels and ensure lug nuts are torqued to manufacturer specifications.
Reconnect the negative battery terminal.
Conduct a test drive to ensure the shaking has been resolved.