why does my Volkswagen Golf MK7.5 (2020-Present) shake when I brake

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

508 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and fix shaking when braking in Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted before working underneath.
•Allow the brakes to cool before inspection or replacement to avoid burns.

Symptoms

•Steering wheel vibration while braking
•Pulsation felt in the brake pedal
•Vehicle shakes or shudders during braking
•Increased stopping distance
•Possible noise from the brakes (grinding or squeaking)

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces.
2
Check brake pads for wear and proper installation.
3
Examine suspension components (tie rods, control arms, struts) for damage or wear.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Tire iron
•Torque wrench
•OBD-II scanner
•Brake rotor tool
•Socket set
•Wrench set
•Alignment machine
•Wheel balancer

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces.
2
Check brake pads for wear and proper installation.
3
Examine suspension components (tie rods, control arms, struts) for damage or wear.
4
Verify wheel alignment and balance.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

1. Preparation

Tools Required: Jack and jack stands, tire iron, torque wrench, OBD-II scanner.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the battery if necessary to avoid accidental short circuits.

2. Remove Wheels

Loosen the lug nuts slightly while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheels.

3. Inspect and Replace Brake Components

A. Inspect Brake Rotors

Check rotors for warping using a dial indicator or visually for grooves.
If warped, proceed to replace the rotors.
Tools Required: Brake rotor tool, dial indicator.

B. Replace Brake Pads

Remove the caliper bolts and slide the caliper off the rotor.
Replace the brake pads with new, quality pads and reassemble.
Tools Required: Socket set, brake pad spreader.

4. Inspect Suspension Components

Visually inspect tie rods, control arms, and struts for any signs of wear or damage.
Replace any worn or damaged parts as necessary.
Tools Required: Wrench set, ball joint separator.

5. Perform Wheel Alignment and Balance

After reassembling the brakes and suspension, align the wheels using an alignment machine.
Balance the wheels to ensure even tire wear and eliminate vibrations.
Tools Required: Alignment machine, wheel balancer.