why does my Volkswagen Golf MK7.5 (2020-Present) make a grinding noise when turning

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

538 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always use jack stands when working under a vehicle.

Symptoms

•Grinding noise when turning the steering wheel
•Difficulty steering or increased resistance when turning
•Vibration felt through the steering wheel
•Uneven tire wear
•Potential warning lights illuminated on the dashboard (e.g., traction control)

Diagnostic Steps

1
Inspect the power steering fluid level and quality.
2
Check for any leaks in the power steering system.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Inspect the CV joints and axle boots for signs of wear or damage.
5
Test the steering rack for proper function and noise.
6
Check the brake pads and rotors for any signs of contact or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack
•Jack stands
•Socket set
•Torque wrench
•Fluid container
•Funnel
•Pry bar

Parts Required

•Power steering fluid
•Suspension components (as needed)
•CV joint or axle (if damaged)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and quality.
2
Check for any leaks in the power steering system.
3
Examine suspension components for wear or damage, including control arms and bushings.
4
Inspect the CV joints and axle boots for signs of wear or damage.
5
Test the steering rack for proper function and noise.
6
Check the brake pads and rotors for any signs of contact or wear.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery negative terminal to avoid electrical issues.

2. Inspect and Replace Power Steering Fluid

Tools Required: Funnel, fluid container.
Check the power steering fluid reservoir.
- If low, top off with the recommended fluid as per the owner's manual.
- If fluid is contaminated (dark or has debris), drain and replace it.

3. Inspect Suspension Components

Tools Required: Jack, jack stands, socket set.
Raise the vehicle and secure it on jack stands.
Visually inspect control arms, bushings, and struts for cracks or excessive wear.
Replace any damaged components with OEM or high-quality aftermarket parts.

4. Check CV Joints

Tools Required: Socket set, pry bar.
Inspect the CV joints and boots for cracks or tears.
If any damage is found, replace the CV joint or axle as necessary.

5. Steering Rack Inspection

Tools Required: Torque wrench, socket set.
Inspect the steering rack for any signs of wear or noise.
Tighten any loose bolts to the manufacturer's torque specifications.
Replace the steering rack if it’s found to be defective.

6. Brake Inspection

Tools Required: Jack, jack stands, socket set.
Remove the wheel to access the brake components.
Inspect the brake pads for wear and ensure they are not making contact with the rotor when turning.
Replace the pads if they are worn down.