why does my Volkswagen Golf MK7.5 (2020-Present) have a clicking noise in the steering column?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

525 words

Problem Statement

Learn how to diagnose and fix clicking noise in the steering column of Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool if it has been running prior to servicing.

Symptoms

•Clicking noise when turning the steering wheel
•Noise occurs at specific angles or positions of the steering wheel
•Potential loss of steering smoothness
•Difficulty in steering response
•Possible warning lights on the dashboard (e.g., EPS warning)

Diagnostic Steps

1
Inspect the steering column for visible damage or loose components.
2
Check the steering shaft and universal joints for wear or misalignment.
3
Test the power steering fluid level and condition; ensure it is within specifications.
4
Listen for changes in noise when turning the steering wheel while stationary and in motion.
5
Scan the vehicle with an OBD-II scanner for any related fault codes.
6
Examine the steering angle sensor for proper functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Screwdriver set
•Torque wrench
•Grease gun
•OBD-II scanner

Parts Required

•Steering column cover screws (if damaged)
•Lubricant for universal joints
•Replacement components (if any wear is detected)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the steering column for visible damage or loose components.
2
Check the steering shaft and universal joints for wear or misalignment.
3
Test the power steering fluid level and condition; ensure it is within specifications.
4
Listen for changes in noise when turning the steering wheel while stationary and in motion.
5
Scan the vehicle with an OBD-II scanner for any related fault codes.
6
Examine the steering angle sensor for proper functionality.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the vehicle battery to ensure safety during the repair.
Ensure the vehicle is on a level surface with the wheels straight.

2. Remove the Steering Column Cover

Remove screws or fasteners securing the upper and lower steering column covers.
Carefully detach the covers to expose the steering column components.

3. Inspect and Tighten Components

Check for any loose fasteners or bolts on the steering column and associated components.
Tighten any loose bolts (specify torque values per manufacturer’s specifications) to ensure all parts are secure.
Inspect the wiring harness connected to the steering column for any signs of wear or rubbing.

4. Check Steering Shaft and Universal Joints

Inspect the steering shaft for any signs of wear or damage.
Lubricate the universal joints with appropriate grease if they are dry.
Replace any worn or damaged components as necessary.

5. Reassemble the Steering Column

Reattach the steering column covers securely using the previously removed screws or fasteners.
Ensure all components are aligned properly.

6. Reconnect Battery and Test

Reconnect the battery.
Start the vehicle and check for any abnormal noises while turning the steering wheel.
Conduct a test drive to confirm the issue has been resolved.