what should I do if my Volkswagen Golf MK7.5 (2020-Present) engine light is on and car shakes?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

577 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine light issues and shaking in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before opening any components to prevent burns.

Symptoms

•Check engine light illuminated
•Vehicle shakes or vibrates during idle and acceleration
•Rough idle when stopped
•Decreased acceleration response
•Possible misfiring sounds from the engine

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the engine bay for any visible signs of damage, loose connections, or disconnected vacuum lines.
3
Check spark plugs and ignition coils for signs of wear or damage.
4
Inspect fuel injectors for proper operation and cleanliness.
5
Examine engine mounts for wear or failure that could contribute to shaking.
6
Verify that the air filter is clean and not obstructing airflow.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Spark plug socket
•Multimeter

Parts Required

•Spark plugs
•Ignition coils
•Fuel injectors (if necessary)
•Engine mounts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the engine bay for any visible signs of damage, loose connections, or disconnected vacuum lines.
3
Check spark plugs and ignition coils for signs of wear or damage.
4
Inspect fuel injectors for proper operation and cleanliness.
5
Examine engine mounts for wear or failure that could contribute to shaking.
6
Verify that the air filter is clean and not obstructing airflow.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the battery to ensure safety during electrical work.

2. Inspect and Replace Spark Plugs

Remove the engine cover if applicable.
Use a socket set to remove spark plug wires or coils.
Extract the spark plugs using a spark plug socket.
Inspect spark plugs for wear; replace with OEM specifications if necessary.
Reinstall spark plugs and reconnect wires or coils.

3. Check and Replace Ignition Coils

If misfiring codes are present, inspect ignition coils.
Remove the bolts securing the ignition coils.
Disconnect the electrical connectors and lift out the coils.
Replace any faulty ignition coils with new ones.
Reattach connectors and secure coils with bolts.

4. Examine Fuel Injectors

Disconnect the fuel pump relay and purge fuel pressure.
Disconnect the electrical connectors from the fuel injectors.
Remove the fuel rail by loosening the mounting bolts.
Inspect and clean the injectors; replace them if clogged or damaged.
Reinstall the fuel rail and reconnect all electrical connectors.

5. Check Engine Mounts

Inspect the engine mounts visually for cracks or deterioration.
If mounts are damaged, support the engine with a jack and remove the bolts securing the mounts.
Replace the mounts with new OEM parts and torque bolts to manufacturer specifications.

6. Final Checks

Reconnect the battery and start the engine.
Allow the engine to idle and check for any abnormal vibrations.
Test drive the vehicle under various conditions to ensure proper operation.