Volkswagen Golf MK7.5 (2020-Present) interior lights staying on what could be wrong

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

523 words

Problem Statement

Learn how to diagnose and fix interior lights that stay on in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shock or short circuits.

Symptoms

•Interior lights remain on continuously
•Dome light does not turn off when doors are closed
•Warning message displayed on the dashboard
•Battery drain observed after prolonged periods of inactivity
•Doors may not lock automatically when the vehicle is in motion

Diagnostic Steps

1
Use an OBD-II scanner to check for any fault codes related to the body control module or door switches.
2
Inspect the door switch mechanisms for proper function; manually activate each switch to check for response.
3
Check the vehicle's interior light settings through the infotainment system to ensure they are not set to remain on.
4
Test the battery voltage to ensure it is within normal operating range.
5
Inspect the wiring harness and connectors associated with the door switches for damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set

Parts Required

•Replacement door switches (if faulty)
•Electrical tape (for wiring repairs)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Use an OBD-II scanner to check for any fault codes related to the body control module or door switches.
2
Inspect the door switch mechanisms for proper function; manually activate each switch to check for response.
3
Check the vehicle's interior light settings through the infotainment system to ensure they are not set to remain on.
4
Test the battery voltage to ensure it is within normal operating range.
5
Inspect the wiring harness and connectors associated with the door switches for damage or corrosion.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety while working on electrical components.

2. Inspect and Test Door Switches

Tools Required: Multimeter
Sub-steps:
1. Locate the door switches for each door.
2. Disconnect the wiring harness from each switch.
3. Use a multimeter to test for continuity by pressing the switch; continuity should be present when pressed.
4. Replace any faulty door switches as necessary.

3. Check Interior Light Settings

Tools Required: None
Sub-steps:
1. Turn on the ignition and access the vehicle’s infotainment system.
2. Navigate to the vehicle settings menu and locate the interior lighting settings.
3. Ensure the setting is configured to turn off lights when doors are closed.

4. Inspect Wiring Harness

Tools Required: Socket set, multimeter
Sub-steps:
1. Remove any necessary panels to access the wiring harness connected to the door switches.
2. Visually inspect the wiring for any signs of damage, fraying, or corrosion.
3. Repair or replace any damaged sections of wiring.

5. Reconnect the Battery and Test

Tools Required: None
Sub-steps:
1. Reconnect the negative terminal of the battery.
2. Test the functionality of the interior lights by opening and closing the doors.
3. Confirm that the lights turn off as expected when doors are closed.