FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK7.5 (2020-Present) wipers won't turn off what's the fix - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/my Volkswagen Golf MK7.5 (2020-Present) wipers won't turn off what's the fix

my Volkswagen Golf MK7.5 (2020-Present) wipers won't turn off what's the fix

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
512 words

Problem Statement

Learn how to diagnose and fix wipers that won't turn off in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shocks or shorts.
  • •Allow the engine and components to cool before handling.

Symptoms

  • •Wipers continuously operating even when the switch is off
  • •Wipers stuck in the middle of the windshield
  • •Possible accompanying issue with the windshield washer system
  • •Intermittent wiper function may not be working properly
  • •Potential dashboard warning light related to electrical system

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Flathead screwdriver

Parts Required

  • •Wiper switch (if defective)
  • •Wiper relay (if defective)
  • •Wiper motor (if defective)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, socket set, and flathead screwdriver.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Inspect and Replace Wiper Switch
  • Remove the steering column cover using the socket set.
  • Disconnect the wiper switch connector.
  • Use a multimeter to test the switch for continuity in both on and off positions.
  • If defective, replace the wiper switch with a new one by reversing the removal steps.
3. Test and Replace Wiper Relay
  • Locate the wiper relay in the fuse box (consult the owner's manual for exact location).
  • Remove the relay and test it with a multimeter for continuity.
  • If the relay is faulty, replace it with a new relay.
4. Inspect Wiper Motor Connections
  • Reconnect the negative battery terminal.
  • Access the wiper motor by removing the wiper arms and cowl cover.
  • Check the wiring harness to the motor for any signs of damage or corrosion.
  • Clean any corroded connections and ensure they are firmly connected.
5. Test Wiper Motor Function
  • With the wiper motor exposed, apply direct power to the motor leads from a 12V battery.
  • If the motor does not operate, it must be replaced.
  • If it works, reconnect everything and ensure the issue is resolved.