FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK7.5 (2020-Present) wipers not working what should I inspect - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/my Volkswagen Golf MK7.5 (2020-Present) wipers not working what should I inspect

my Volkswagen Golf MK7.5 (2020-Present) wipers not working what should I inspect

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
473 words

Problem Statement

Learn how to diagnose and fix wiper issues in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent shocks.
  • •Allow the vehicle to cool before working on any components near the engine.

Symptoms

  • •Wipers do not activate when switched on
  • •Wiper motor makes no noise
  • •Wiper blades remain stationary
  • •No water spray from windshield washer system
  • •Possible warning lights on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Fuse puller
  • •Pliers

Parts Required

  • •Wiper motor (if defective)
  • •Wiper fuse (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the vehicle's battery to avoid electrical shock.
2. Check and Replace the Fuse
  • Locate the fuse box, typically found under the dashboard or in the engine compartment.
  • Remove the wiper fuse using a fuse puller or pliers.
  • Inspect the fuse for continuity; if blown, replace it with a fuse of the same amperage (check the owner’s manual for specifications).
3. Inspect the Wiper Motor
  • Remove the wiper arms by loosening the retaining nuts with a socket wrench.
  • Disconnect the electrical connector from the wiper motor.
  • Use a multimeter to test for power at the connector when the wiper switch is activated.
  • If no power is detected, further inspect the wiring harness.
4. Test the Wiper Motor
  • Connect the wiper motor directly to a power source (battery) to check if it operates.
  • If the motor runs, it must be reinstalled. If it doesn’t, replace the wiper motor.
5. Reassemble Components
  • Reconnect all electrical connectors and reattach the wiper arms.
  • Ensure the wiper arms are positioned correctly and secure the nuts.

Tools Required:

  • Multimeter
  • Socket set
  • Fuse puller
  • Pliers

Parts Required:

  • Wiper motor (if defective)
  • Wiper fuse (if blown)

Estimated Repair Time: 1-2 hours

Safety Warnings:

  • Disconnect the battery before working on electrical components to prevent shocks.
  • Allow the vehicle to cool before working on any components near the engine.