my Volkswagen Golf MK7.5 (2020-Present) rear brakes are grinding

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

513 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise in rear brakes of Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported with jack stands before working underneath.
•Allow the brakes to cool before handling components after driving.

Symptoms

•Grinding noise during braking
•Vibration in the brake pedal
•Reduced braking efficiency
•Warning light on the dashboard (if equipped)
•Visual wear on brake pads when inspected

Diagnostic Steps

1
Inspect rear brake pads for wear and thickness.
2
Check brake rotors for scoring or damage.
3
Examine calipers for proper operation and any signs of sticking.
4
Look for debris or contaminants on brake components.
5
Measure brake fluid level and inspect for contamination.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Brake caliper tool
•Torque wrench
•Brake cleaner
•Brake grease

Parts Required

•New rear brake pads
•New brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Wear safety gloves and goggles.

2. Raise the Vehicle

Use a jack to lift the rear of the vehicle and secure it with jack stands.
Remove the rear wheels using a socket set.

3. Remove Brake Components

Brake Caliper Removal:
1. Remove the caliper bolts using a socket wrench.
2. Carefully slide the caliper off the rotor; support it with a hanger or bungee cord to avoid stressing the brake line.
Brake Pad Removal:
1. Remove any retaining clips or pins securing the brake pads.
2. Slide the old brake pads out of the caliper bracket.

4. Inspect and Replace Brake Parts

Inspect Rotors:
- Check for scoring or warping. If damaged, replace the rotor.
Install New Brake Pads:
1. Apply brake grease to the backing of the new pads (if applicable).
2. Slide the new pads into the caliper bracket.
Reinstall Caliper:
1. Compress the caliper piston using a brake caliper tool to make room for the new pads.
2. Position the caliper over the new pads and secure it with bolts, tightening to manufacturer specifications (typically around 25-30 Nm).

5. Reassemble and Lower the Vehicle

Reinstall the wheels and hand-tighten the lug nuts.
Lower the vehicle off the jack stands and tighten the lug nuts to the specified torque (typically 100-120 Nm).

6. Brake System Check

Pump the brake pedal to ensure proper pedal feel before driving.
Check brake fluid level and top off if necessary.