my Volkswagen Golf MK7.5 (2020-Present) makes a grinding noise when turning, what to check?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

525 words

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components related to the power steering system.

Symptoms

•Grinding noise during turns
•Difficulty steering or increased resistance
•Vibration in the steering wheel
•Uneven tire wear
•Suspension instability or bouncing

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the CV joints and boots.
3
Examine the wheel bearings for play or roughness by rocking the wheel.
4
Inspect the suspension components, including struts and control arms.
5
Perform a visual inspection of the tires for signs of uneven wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Wrench set
•Screwdriver set
•Safety gloves
•Safety goggles

Parts Required

•Power steering fluid (if needed)
•CV joint boots (if damaged)
•Wheel bearings (if found defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the CV joints and boots.
3
Examine the wheel bearings for play or roughness by rocking the wheel.
4
Inspect the suspension components, including struts and control arms.
5
Perform a visual inspection of the tires for signs of uneven wear or damage.

Solution

1. Preparation

Gather tools and materials:
- Jack and jack stands
- Socket set
- Torque wrench
- Wrench set
- Screwdriver set
- Safety gloves and goggles
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Inspect Power Steering System

Check Fluid Level:
- Locate the power steering reservoir.
- Remove the cap and check fluid level against the markings.
- If low, top up with the manufacturer-recommended power steering fluid.
Check for Leaks:
- Inspect hoses and connections for any signs of leakage.

3. Inspect CV Joints and Boots

Visual Inspection:
- Raise the vehicle using a jack and secure with jack stands.
- Examine the CV boots for tears or grease leakage.
Check Joint Condition:
- Rotate the wheels while observing the CV joints for any unusual movement or noise.

4. Check Wheel Bearings

Wheel Play Test:
- Grab the wheel at the 12 and 6 o'clock positions and rock it back and forth.
- If there is noticeable play, the wheel bearing may need replacement.
Spin Test:
- Spin the wheel by hand and listen for grinding noises that indicate bearing failure.

5. Inspect Suspension Components

Visual Inspection:
- Inspect struts, control arms, and bushings for wear or damage.
- Look for any signs of oil leakage from the strut assembly.
Bounce Test:
- Push down on the front corners of the vehicle. If it bounces more than twice, the struts may need replacing.