my Volkswagen Golf MK7.5 (2020-Present) feels like it’s losing grip during turns, what’s wrong?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

491 words

Problem Statement

Learn how to diagnose and fix loss of grip during turns in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before inspecting components.

Symptoms

•Unstable handling during turns
•Excessive body roll while cornering
•Tire squeal or noise when turning
•Warning lights related to traction control may illuminate
•Uneven tire wear observed

Diagnostic Steps

1
Inspect the tires for proper inflation and tread depth.
2
Check the suspension components for wear or damage, including struts, shocks, and bushings.
3
Scan the vehicle's computer for error codes related to the ABS or traction control system.
4
Perform a visual inspection of the alignment settings.
5
Test the traction control system by driving on a controlled surface.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Tread depth gauge
•Socket set
•Torque wrench
•Jack and jack stands

Parts Required

•New tires (if needed)
•Replacement suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for proper inflation and tread depth.
2
Check the suspension components for wear or damage, including struts, shocks, and bushings.
3
Scan the vehicle's computer for error codes related to the ABS or traction control system.
4
Perform a visual inspection of the alignment settings.
5
Test the traction control system by driving on a controlled surface.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat, level surface and apply the parking brake.
Disconnect the battery for safety if working on electrical components.

2. Tire Inspection and Replacement

Inspect Tires:
- Check tire pressure using a tire pressure gauge.
- Measure tread depth with a tread depth gauge.
- Look for any visible damage or uneven wear.
Replace Tires (if needed):
- Remove the wheel using a socket set.
- Install new tires, ensuring they are properly balanced.
- Torque lug nuts to the manufacturer's specifications (usually 80-100 ft-lbs).

3. Suspension Component Inspection and Replacement

Inspect Suspension:
- Raise the vehicle using a jack and secure with jack stands.
- Examine struts and shocks for leaks or damage.
- Check control arms and bushings for signs of wear.
Replace Worn Components:
- Remove the damaged component using appropriate tools (e.g., socket set, wrench).
- Install new parts following manufacturer specifications.
- Torque to the specified values.

4. Wheel Alignment

Take the vehicle to a professional alignment shop.
Ensure all alignment angles (camber, caster, toe) are within manufacturer specifications.

5. Traction Control System Check

Inspect System:
- Reconnect the battery and start the vehicle.
- Check for warning lights on the dashboard.
Test Functionality:
- Drive the vehicle in a safe area to ensure the traction control engages properly.