FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK7.5 (2020-Present) AC is blowing warm air what should I check - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/my Volkswagen Golf MK7.5 (2020-Present) AC is blowing warm air what should I check

my Volkswagen Golf MK7.5 (2020-Present) AC is blowing warm air what should I check

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
571 words

Problem Statement

Complete guide to fixing AC that blows warm air in Volkswagen Golf MK7.5. Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Ensure the vehicle is properly charged with refrigerant; use proper equipment to avoid exposure

Symptoms

  • •Warm air blowing from the AC vents
  • •AC compressor not engaging
  • •Unusual noises from the AC system
  • •Foggy windows due to humidity
  • •Increased cabin temperature

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Manifold gauge set
  • •Refrigerant
  • •Safety goggles
  • •Gloves
  • •Screwdriver
  • •Socket set
  • •Torque wrench
  • •Refrigerant recovery machine

Parts Required

  • •Cabin air filter
  • •AC compressor (if necessary)
  • •Refrigerant

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Disconnect the battery to prevent any electrical hazards.
2. Recharge the AC System
  • Tools Required: Manifold gauge set, refrigerant, safety goggles, gloves.
  • Connect the low and high-pressure sides of the manifold gauge to the AC service ports.
  • Start the engine and turn on the AC to the maximum setting.
  • Check the readings on the gauges to determine if the system needs refrigerant.
  • If low, add the appropriate type of refrigerant (e.g., R-134a) according to manufacturer specifications until the system reaches proper pressure.
3. Inspect and Replace the Cabin Air Filter
  • Tools Required: Screwdriver (if necessary).
  • Locate the cabin air filter compartment (usually behind the glove box).
  • Remove the cover and take out the old cabin air filter.
  • Inspect for dirt and debris; replace if necessary with a new filter.
4. Check and Replace AC Compressor
  • Tools Required: Socket set, torque wrench, refrigerant recovery machine.
  • If the compressor is not engaging, remove the drive belt to access the compressor.
  • Disconnect the electrical connector and refrigerant lines.
  • Remove the compressor from its mounting.
  • Install the new compressor, ensuring all connections are secure and torqued to specifications.
  • Reconnect the refrigerant lines and electrical connector.
5. Reconnect Battery and Test
  • Reconnect the battery and start the engine.
  • Turn the AC on to check for cold air and monitor system operation.
  • Ensure no leaks are present around the compressor and service ports.