how to reset the tire pressure light in Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

0.5 hours

Time

medium

Difficulty

medium

Severity

3 min read

469 words

Problem Statement

Learn how to reset the tire pressure light in Volkswagen Golf (2013-2020). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

0.5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a flat surface when checking tire pressures.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Potential fluctuation in tire pressure readings
•Warning message on the instrument cluster regarding tire pressure

Diagnostic Steps

1
Check tire pressures manually using a tire pressure gauge to ensure they are at the recommended levels.
2
Inspect each tire for visible signs of damage or punctures.
3
Verify that the spare tire (if equipped with a TPMS sensor) also has correct pressure.
4
Confirm that the vehicle is not in 'service mode' which may disable the TPMS resetting function.
5
Use an OBD-II scanner to check for any fault codes related to the Tire Pressure Monitoring System (TPMS).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (optional)

Parts Required

•None, unless tire pressure adjustment or repairs are necessary.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check tire pressures manually using a tire pressure gauge to ensure they are at the recommended levels.
2
Inspect each tire for visible signs of damage or punctures.
3
Verify that the spare tire (if equipped with a TPMS sensor) also has correct pressure.
4
Confirm that the vehicle is not in 'service mode' which may disable the TPMS resetting function.
5
Use an OBD-II scanner to check for any fault codes related to the Tire Pressure Monitoring System (TPMS).

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn the ignition to the "ON" position without starting the engine.
Gather necessary tools: OBD-II scanner (if needed) and tire pressure gauge.

2. Check and Adjust Tire Pressures

Use a tire pressure gauge to measure the pressure in each tire.
Inflate or deflate tires to match the manufacturer’s recommended pressure, typically found on the driver’s door jamb.

3. Reset the TPMS

Using the Vehicle Menu:
- Turn the ignition to the "ON" position.
- Press the "Menu" button on the steering wheel to access the vehicle settings.
- Navigate to "Vehicle Settings" using the arrow keys.
- Select "Tire Pressure Monitor".
- Choose "Reset" or "Calibrate" and confirm the reset when prompted.
Using the TPMS Reset Button (if equipped):
- Locate the TPMS reset button (usually under the steering wheel or near the fuse box).
- With the ignition in the "ON" position, press and hold the reset button until the tire pressure light blinks three times, then release.
- Start the engine and allow the vehicle to run for a few minutes; the light should turn off.