how to replace the windshield wipers on my Volkswagen Golf MK7.5 (2020-Present)?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

30 minutes

Time

easy

Difficulty

low

Severity

3 min read

420 words

Problem Statement

Step-by-step guide on how to replace windshield wipers on Volkswagen Golf MK7.5. Learn about symptoms, tools, and safety precautions.

Affected Component

Body/Interior

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Be cautious to not let the wiper arms snap back against the windshield.
•Ensure the vehicle is turned off during the replacement process to prevent accidental activation of the wipers.

Symptoms

•Streaking on the windshield during operation
•Wipers skipping or jumping across the glass
•Worn or damaged rubber blades
•Unusual noises during wiper operation
•Wipers failing to make proper contact with the windshield

Diagnostic Steps

1
Inspect existing wiper blades for visible wear or damage.
2
Test wiper operation to confirm functionality and performance.
3
Check linkage and motor for proper operation if wipers are not functioning.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Clean cloth (optional)

Parts Required

•New windshield wiper blades (specific to Volkswagen Golf MK7.5)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts before starting the replacement.
Ensure the vehicle is parked on a level surface and the ignition is off.
Tools Required: None specific, but a clean cloth may be helpful for cleaning.

2. Lift the Wiper Arms

Gently lift the wiper arms away from the windshield until they are in a vertical position.
Safety Warning: Be cautious to not let the wiper arms snap back against the windshield.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade downwards to detach it from the arm.
Repeat for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blades and align the connector with the wiper arm.
Slide the wiper blade onto the arm until you hear a click indicating it is securely locked in place.
Ensure the wiper blade is oriented correctly; the rubber blade should face the windshield.

5. Lower Wiper Arms

Carefully lower the wiper arms back onto the windshield.
Confirm that the wipers sit flat against the glass without any gaps.