how to replace the transmission filter on my Volkswagen Golf MK7.5 (2020-Present)

Solution

1. Preparation

• Gather tools and parts required.
• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the negative battery terminal to prevent electrical issues.

2. Drain Transmission Fluid

• Place a drain pan under the transmission pan.
• Remove the transmission pan bolts using a socket wrench.
• Carefully lower the pan and allow the fluid to drain completely.

3. Remove Old Filter

• Once the pan is removed, locate the transmission filter.
• Remove any screws or clips securing the filter to the transmission.
• Pull down the old filter and discard it.

4. Install New Filter

• Position the new filter into place, ensuring it fits snugly.
• Secure with screws or clips as required.

5. Clean Transmission Pan

• Clean the transmission pan thoroughly with brake cleaner to remove old gasket material and debris.
• Inspect the magnet inside the pan for metal shavings; clean it if necessary.

6. Reinstall Transmission Pan

• Apply a thin layer of gasket maker or use a new gasket if applicable.
• Reattach the transmission pan and tighten the bolts to the manufacturer’s specified torque.

7. Refill Transmission Fluid

• Reconnect the negative battery terminal.
• Use a funnel to refill the transmission with new, manufacturer-recommended fluid through the dipstick tube or designated fill port.
• Check the fluid level and ensure it is at the appropriate mark.