how to get rid of steering column noise in my Volkswagen Golf MK7.5 (2020-Present)

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

454 words

Problem Statement

Learn how to diagnose and fix steering column noise in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the steering system to avoid electrical shorts.
•Allow the engine to cool before starting any maintenance work.

Symptoms

•Clicking or popping noise when turning the steering wheel
•Grinding sound while steering
•Whining noise at low speeds
•Loose steering feel
•Vibration in the steering wheel

Diagnostic Steps

1
Inspect the steering column for any visible wear or damage.
2
Check the power steering fluid level and condition.
3
Use an OBD-II scanner to check for any related error codes.
4
Examine the steering rack and tie rods for play or damage.
5
Test the steering joints and bearings for any signs of wear or lack of lubrication.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Steering wheel puller
•Grease
•OBD-II scanner

Parts Required

•Steering column bearings (if worn)
•Steering rack bushings (if damaged)
•Power steering fluid (if low)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the steering column for any visible wear or damage.
2
Check the power steering fluid level and condition.
3
Use an OBD-II scanner to check for any related error codes.
4
Examine the steering rack and tie rods for play or damage.
5
Test the steering joints and bearings for any signs of wear or lack of lubrication.

Solution

1. Preparation

Tools Required: Socket set, torque wrench, steering wheel puller, grease, OBD-II scanner.
Disconnect the negative battery terminal to ensure safety while working on the electrical components.

2. Inspect and Tighten Components

Remove the steering wheel using a steering wheel puller.
Inspect the steering column for any loose bolts or connections.
Tighten all fasteners to the manufacturer's torque specifications (typically around 30 Nm for steering components, but verify with the service manual).

3. Replace Worn Components

If any joints, bearings, or bushings are worn, remove the affected parts.
Replace with OEM parts or high-quality aftermarket replacements.
Ensure all new components are properly lubricated according to service manual specifications.

4. Reassemble

Reattach the steering wheel, ensuring it is aligned properly.
Connect the negative battery terminal.
Use a torque wrench to tighten the steering wheel bolt to the manufacturer's specified torque (usually between 35-50 Nm).

5. Final Checks

After reassembly, check the steering column for any movement or noise by turning the wheel from lock to lock.
Ensure there are no obstructions in the steering mechanism.