how to fix Volkswagen Golf MK7.5 (2020-Present) steering noise when turning

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

643 words

Problem Statement

Learn how to diagnose and fix steering noise in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting any components to avoid burns.

Symptoms

•Steering noise when turning left or right
•Grinding or squeaking sounds from the steering column
•Decreased steering responsiveness
•Fluid leaks around the steering rack or pump
•Steering wheel vibration during turns

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks around the steering rack and pump.
3
Scan for any error codes related to the steering system using an OBD-II scanner.
4
Examine the steering linkage and components for wear or damage.
5
Test the power steering pump for proper operation and noise levels.
6
Inspect the steering column for any loose connections or debris.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Funnel
•Clean rag
•Fluid catch pan

Parts Required

•Power steering fluid
•Power steering pump (if replacement is necessary)
•Steering rack (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks around the steering rack and pump.
3
Scan for any error codes related to the steering system using an OBD-II scanner.
4
Examine the steering linkage and components for wear or damage.
5
Test the power steering pump for proper operation and noise levels.
6
Inspect the steering column for any loose connections or debris.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative terminal of the battery.

2. Inspect and Replace Power Steering Fluid

Tools Required: Funnel, clean rag
Check power steering fluid level using the dipstick.
- If low, add the recommended type of power steering fluid.
- If fluid is discolored or has debris, proceed to replace it.
To replace:
1. Locate the power steering reservoir and remove the cap.
2. Use a turkey baster to remove old fluid from the reservoir.
3. Refill with new power steering fluid until the correct level is reached.
4. Replace the cap securely.

3. Inspect and Replace Power Steering Pump (if necessary)

Tools Required: Socket set, torque wrench, fluid catch pan
Remove the power steering pump:
1. Disconnect the inlet and outlet hoses from the pump.
2. Unbolt the pump from its mounting bracket.
3. Carefully remove the pump from its location.
Install the new power steering pump:
1. Position the new pump into place and secure it with bolts to the bracket.
2. Reattach the hoses, ensuring they are tight and leak-free.
3. Torque bolts to manufacturer specifications.

4. Check Steering Rack and Linkage

Tools Required: Socket set, torque wrench
Inspect the steering rack and linkage for any visible damage or wear.
- If damaged, replace the steering rack.
To replace the steering rack:
1. Disconnect the tie rods from the steering rack.
2. Remove any bolts securing the rack to the subframe.
3. Carefully extract the old rack from the vehicle.
4. Install the new steering rack and secure it with bolts.
5. Reconnect tie rods and torque them to specifications.

5. Refill and Bleed Power Steering System

Tools Required: Funnel, clean rag
Fill the power steering reservoir with new fluid.
Start the engine and turn the steering wheel from lock to lock several times to purge air from the system.
Check fluid level and top off as necessary.