how to fix my Volkswagen Golf MK7.5 (2020-Present) steering column noise?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

463 words

Problem Statement

Learn how to diagnose and fix steering column noise in Volkswagen Golf MK7.5. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is on a flat surface and securely supported before beginning repairs.

Symptoms

•Grinding or squeaking noise when turning the steering wheel
•Loose or wobbly steering feel
•Difficulty in steering or stiff steering response
•Noise present when stationary and turning the wheel
•Intermittent noise that occurs at specific angles of steering

Diagnostic Steps

1
Inspect the steering column for visible damage or signs of wear.
2
Check the power steering fluid level and condition.
3
Listen for noise while turning the steering wheel in both directions at various speeds.
4
Examine the steering rack and associated components for play or looseness.
5
Verify that the steering shaft universal joint is properly lubricated and free of debris.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Cleaning solvent
•Cloths
•Grease gun
•Appropriate grease

Parts Required

•Multi-purpose grease
•Replacement universal joint (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the steering column for visible damage or signs of wear.
2
Check the power steering fluid level and condition.
3
Listen for noise while turning the steering wheel in both directions at various speeds.
4
Examine the steering rack and associated components for play or looseness.
5
Verify that the steering shaft universal joint is properly lubricated and free of debris.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical issues during repair.
Allow the vehicle to cool down if it has been running.

2. Inspect and Clean

Tools Required: Socket set, torque wrench, cleaning solvent, cloths
Remove any covers or panels obstructing access to the steering column.
Clean the steering column area with a cleaning solvent to remove dirt and debris.
Inspect the universal joint for wear; replace if necessary.

3. Lubrication

Tools Required: Grease gun, appropriate grease
Apply a suitable multi-purpose grease to the universal joint and any moving parts of the steering column.
Ensure that grease penetrates all joint surfaces and wipe away excess.

4. Tighten Components

Tools Required: Torque wrench
Check all bolts and fasteners associated with the steering column and rack.
Tighten any loose bolts to manufacturer specifications (typically around 15-25 Nm, but check the service manual for exact values).

5. Reassemble

Reinstall any covers or panels removed during the inspection and repair process.
Reconnect the negative battery terminal.