how to fix my Volkswagen Golf MK7.5 (2020-Present) if it shakes at high speeds

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

443 words

Problem Statement

Learn how to diagnose and fix shaking at high speeds in Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface and secure before lifting with a jack.
•Always wear safety glasses when working with tires and suspension components.

Symptoms

•Shaking or vibrating felt through the steering wheel
•Vibration increases with speed
•Uneven tire wear
•Steering wheel pulling to one side
•Noise or rattling from the suspension at high speeds

Diagnostic Steps

1
Inspect tire pressure and ensure they are inflated to the manufacturer's specifications.
2
Check for visible damage to the tires (bulges, cracks, or uneven wear).
3
Perform a wheel balance check on all four tires.
4
Inspect the suspension components (shocks, struts, and bushings) for wear or damage.
5
Check the wheel alignment using an alignment machine.
6
Test drive the vehicle to confirm the presence and severity of the shaking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire gauge
•Wheel balancer
•Jack
•Jack stands
•Socket set
•Alignment machine
•Lug nut wrench

Parts Required

•Replacement tires (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and ensure they are inflated to the manufacturer's specifications.
2
Check for visible damage to the tires (bulges, cracks, or uneven wear).
3
Perform a wheel balance check on all four tires.
4
Inspect the suspension components (shocks, struts, and bushings) for wear or damage.
5
Check the wheel alignment using an alignment machine.
6
Test drive the vehicle to confirm the presence and severity of the shaking.

Solution

1. Tire Inspection and Adjustment

Sub-steps:
- Check all tire pressures with a tire gauge; adjust to recommended PSI.
- Visually inspect each tire for damage or excessive wear; replace if necessary.

2. Wheel Balancing

Sub-steps:
- Remove each wheel from the vehicle using a lug nut wrench.
- Mount the wheel on a wheel balancer.
- Adjust weights as necessary to achieve balance; reattach the wheel.
Tools Required: Wheel balancer, lug nut wrench.

3. Suspension Inspection

Sub-steps:
- Lift the vehicle using a jack and secure it with jack stands.
- Visually inspect the shock absorbers and struts for leaks or damage.
- Check control arms and bushings for wear or play.
- Replace any worn suspension components as necessary.
Tools Required: Jack, jack stands, socket set.

4. Wheel Alignment

Sub-steps:
- Use an alignment machine to check the alignment specifications.
- Adjust the camber, caster, and toe settings to match manufacturer's specifications.
Tools Required: Alignment machine.