how to check the AdBlue level in Volkswagen Golf MK7.5 (2020-Present)

Volkswagen Golf MK7.5 (2020-Present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

405 words

Problem Statement

Learn how to check and refill the AdBlue level in your Volkswagen Golf MK7.5 (2020-Present). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Exhaust System

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Avoid skin contact with AdBlue; it can cause irritation. Use gloves if necessary.

Symptoms

•Warning light for AdBlue level illuminated on the dashboard
•Engine performance issues due to low AdBlue levels
•Message display indicating 'AdBlue level low'

Diagnostic Steps

1
Locate the AdBlue tank filler cap, which is typically found next to the fuel filler cap or under the trunk floor.
2
Check the vehicle’s infotainment system for AdBlue level status; navigate to the vehicle status or settings menu.
3
Visually inspect the AdBlue tank if accessible, looking for any obvious signs of leaks or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Funnel

Parts Required

•AdBlue fluid (ISO 22241 compliant)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Locate the AdBlue tank filler cap, which is typically found next to the fuel filler cap or under the trunk floor.
2
Check the vehicle’s infotainment system for AdBlue level status; navigate to the vehicle status or settings menu.
3
Visually inspect the AdBlue tank if accessible, looking for any obvious signs of leaks or damage.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off the engine and remove the keys from the ignition.
Gather necessary tools such as a funnel if adding AdBlue is required.

2. Access the AdBlue Tank

Open the fuel filler door or the trunk compartment, depending on the model.
If applicable, remove any cover or panel that conceals the AdBlue tank filler neck.

3. Check the AdBlue Level

Use the vehicle’s infotainment system to check the current AdBlue level. Select the "Vehicle Status" option and look for AdBlue information.
If the level is low, proceed to the next step.

4. Add AdBlue (if necessary)

If adding AdBlue, ensure you are using the correct quality (ISO 22241) and type.
Insert a funnel into the AdBlue filler neck and slowly pour the AdBlue until it reaches the maximum level indicated, being careful not to overfill.
Replace the filler cap securely after refilling.