why does my Volkswagen Golf MK6 (2009-2014) shake when I accelerate

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

463 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Wear safety glasses and gloves when handling tires and suspension components.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Steering wheel vibrates noticeably
•Noise from the front end during acceleration
•Poor handling or stability at high speeds
•Increased wear on tires or uneven tire tread

Diagnostic Steps

1
Inspect wheels and tires for balance and alignment issues.
2
Check tire condition for uneven wear or damage.
3
Examine the suspension components for wear or damage.
4
Inspect the driveshaft and CV joints for signs of wear or damage.
5
Scan for any stored error codes using an OBD-II scanner.
6
Test drive the vehicle to replicate the shaking under various conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Torque wrench
•OBD-II scanner
•Tire balancing machine

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•CV joints or driveshaft components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect wheels and tires for balance and alignment issues.
2
Check tire condition for uneven wear or damage.
3
Examine the suspension components for wear or damage.
4
Inspect the driveshaft and CV joints for signs of wear or damage.
5
Scan for any stored error codes using an OBD-II scanner.
6
Test drive the vehicle to replicate the shaking under various conditions.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
If necessary, lift the vehicle using a jack and secure it on jack stands.

2. Tire Inspection and Balance

Remove the wheel covers or hubcaps if present.
Inspect tires for uneven wear, bulges, or foreign objects; replace if necessary.
Check tire pressure and inflate to the recommended PSI.
Balance the tires using a tire balancing machine; adjust weights as needed.

3. Suspension Inspection

Inspect control arms, bushings, and ball joints for any signs of wear or damage.
Replace any worn or damaged components with new parts.
Re-torque suspension bolts to manufacturer specifications.

4. Drivetrain Inspection

Examine the driveshaft for bends or damage.
Inspect CV joints for tears or leaks in the boot; replace if necessary.
Replace any worn or damaged components in the driveshaft assembly.

5. Reassembly

Reinstall the wheels and torque the lug nuts to the specified torque value (usually around 80-100 ft-lbs for Volkswagen).
Lower the vehicle if it was lifted.