why does my Volkswagen Golf MK6 (2009-2014) have a clicking noise when turning?

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

550 words

Problem Statement

Learn how to diagnose and fix clicking noise when turning in Volkswagen Golf MK6. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always secure the vehicle on jack stands before working underneath it.
•Wear safety glasses to protect eyes from debris when removing components.

Symptoms

•Clicking noise when turning the steering wheel
•Noise may increase with sharper turns
•Possible vibration felt through the steering wheel
•No noticeable loss of power or performance
•Potential grinding noise if the issue worsens

Diagnostic Steps

1
Inspect the outer CV joints for wear or damage, as they commonly produce clicking noises when failing.
2
Check the inner CV joints for play or excessive wear.
3
Examine the wheel bearings for any roughness or play.
4
Inspect the suspension components, including control arms and bushings, for damage or excessive wear.
5
Raise the vehicle and spin the wheels to listen for abnormal noises from the drivetrain.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack and jack stands
•CV joint puller (if needed)
•Torque wrench

Parts Required

•Outer CV joint assembly
•Wheel bearing (if necessary)
•CV joint boot and grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the outer CV joints for wear or damage, as they commonly produce clicking noises when failing.
2
Check the inner CV joints for play or excessive wear.
3
Examine the wheel bearings for any roughness or play.
4
Inspect the suspension components, including control arms and bushings, for damage or excessive wear.
5
Raise the vehicle and spin the wheels to listen for abnormal noises from the drivetrain.

Solution

1. Preparation

Gather all necessary tools and parts before starting.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.

2. Lift the Vehicle

Use a jack to raise the front of the vehicle and secure it on jack stands.
Ensure the vehicle is stable before proceeding.

3. Inspect and Replace CV Joint

Inspect Outer CV Joint:
- Remove the wheel using a socket set.
- Inspect the CV joint boot for tears or grease leaks.
- If damaged, proceed to replace the CV joint.
Replace Outer CV Joint:
- Remove the retaining clip and separate the axle from the hub.
- Slide off the damaged CV joint and replace it with a new one.
- Apply appropriate grease and install a new boot.
- Reinstall the axle and secure with the retaining clip.

4. Inspect and Replace Wheel Bearing (if necessary)

Remove Hub Assembly:
- If the wheel bearing is suspected, remove the brake caliper and rotor.
- Unbolt the hub assembly from the steering knuckle.
Replace Wheel Bearing:
- Use a bearing puller to remove the old bearing.
- Install the new bearing, ensuring it is seated properly.
- Reassemble the hub assembly and reinstall the brake components.

5. Reassemble and Lower Vehicle

Reinstall the wheel and torque the lug nuts to the manufacturer's specifications (usually around 90-100 ft-lbs).
Lower the vehicle and conduct a test drive to verify that the noise has been resolved.